1999 - 2003 7.3L Power Stroke Diesel  
Sponsored by:
Sponsored by: DP Tuner

*** The Official Superduty Morning Coffee Thread ***

Thread Tools
 
Search this Thread
 
  #10486  
Old 03-20-2021, 11:16 PM
RacinJasonWV's Avatar
RacinJasonWV
RacinJasonWV is online now
Lead Driver
Join Date: Jul 2017
Location: WV
Posts: 5,751
Received 1,693 Likes on 1,187 Posts
Originally Posted by Colorado350
We’re supposed to get 3-8” snow Sunday night. I still haven’t heard a Robin yet this Spring but we still have a LOT of winter left in the Rockies. Jason, you get a lot of mosquitoes with the pond in your backyard?
No, actually we don’t. Maybe the water stays too cold for them since it’s spring fed.

I hope we’ve seen the last of the snow for this year. Sometimes a good storm will pop up in March but for the most part we should be done now.

Originally Posted by Dan V
Sorry to interrupt the beautiful pictures....but I am planned to re-seal a drive motor on a 199 Case 1845c, They show the use of Permatex #6 on mounting flanges and in another spot.

What is it and an equal?
Sorry but this line made me chuckle a bit.
Never saw an answer to your question though. Did you get it figured out?
 
  #10487  
Old 03-21-2021, 07:00 AM
Walleye Hunter's Avatar
Walleye Hunter
Walleye Hunter is offline
Hotshot
Join Date: Mar 2014
Location: Douglassville, PA
Posts: 10,422
Received 888 Likes on 625 Posts
Originally Posted by z31freakify
First 6.4 Hemi casualty with the MDS lifters.
Truck:
2017 Ram 2500 2x4 cclb 6.4 68rfe 117k

Last pic left lifter good right lifter collapsed. Unfortunately our DOT inspections prohibit in getting rid of the MDS system, fortunately cought it in time and didn't ruin the cam.
You sure make short work of things, it'd take me a year to do all that.
 
  #10488  
Old 03-21-2021, 07:03 AM
Walleye Hunter's Avatar
Walleye Hunter
Walleye Hunter is offline
Hotshot
Join Date: Mar 2014
Location: Douglassville, PA
Posts: 10,422
Received 888 Likes on 625 Posts
Originally Posted by Dan V
Sorry to interrupt the beautiful pictures....but I am planned to re-seal a drive motor on a 199 Case 1845c, They show the use of Permatex #6 on mounting flanges and in another spot.

What is it and an equal?
Did you figure it out yet? I'd guess that it's some kind of gasket in a tube.
 
  #10489  
Old 03-21-2021, 07:14 AM
KubotaOrange76's Avatar
KubotaOrange76
KubotaOrange76 is offline
Its Comin Right for us!
Join Date: Feb 2005
Location: GA
Posts: 10,515
Received 1,520 Likes on 981 Posts
Appears to be regular blue rtv?





 
  #10490  
Old 03-21-2021, 07:17 AM
sjbj's Avatar
sjbj
sjbj is offline
Laughing Gas
Join Date: Jun 2018
Location: Idaho
Posts: 861
Likes: 0
Received 95 Likes on 58 Posts
Originally Posted by Sous
What a beautiful day for a drive!

We arrived at our spot on the beach safely and had a nice drive along the way. The marsh side of the island is backed up to our site and the beach is about 50 yards from the front of the truck.

@ESwift remembers this island from his visit 15 years ago and out of all of the places we have seen, this is one of our favorites.

Now for some hanging out and several cold IPA's.


Nice Sous. I'm jealous. I need to get my truck up and going so I can get the trailer out. I'd be out today if I could, but it is still too cold for my family..... They don't do cold in camping.....
 
  #10491  
Old 03-21-2021, 08:37 AM
FordTruckNoob's Avatar
FordTruckNoob
FordTruckNoob is online now
Identifies as He/Him/Noob
Join Date: Jan 2005
Location: Henderson, NV
Posts: 10,887
Received 3,032 Likes on 2,002 Posts
  #10492  
Old 03-21-2021, 08:46 AM
Sous's Avatar
Sous
Sous is online now
Fleet Owner
Join Date: May 2014
Location: Lake Hartwell, GA
Posts: 26,142
Received 4,584 Likes on 2,907 Posts
Originally Posted by sjbj
Nice Sous. I'm jealous. I need to get my truck up and going so I can get the trailer out. I'd be out today if I could, but it is still too cold for my family..... They don't do cold in camping.....
@sjbj Kate woke at sunrise and took the dogs to the beach. I'm chilling in bed and will join her in a bit.

We have started preliminary planning of our trip out west and I may hit you up for a decent spot in/near Boise to park the camper for a few days. We stayed at the KOA in Eagle (I think) a few years ago, but that was not for the spot, it was for the proximity to family we are there to visit.

It would be great if our schedules aligned and we could shake hands as well. Maybe see your new shop or you can come out to the campsite, I'll be in touch.

Originally Posted by FordTruckNoob
That was funny! More so because my B6 Audi S4 had a 6 speed manual transmission in it.
 
  #10493  
Old 03-21-2021, 09:45 AM
Dan V's Avatar
Dan V
Dan V is offline
Lead Driver
Join Date: Jun 2013
Location: north of Minneapolis, MN
Posts: 5,275
Received 610 Likes on 397 Posts
Originally Posted by Walleye Hunter
Did you figure it out yet? I'd guess that it's some kind of gasket in a tube.
I think it's been answered above......now, please continue with the slide show.
 
  #10494  
Old 03-21-2021, 10:07 AM
Y2KW57's Avatar
Y2KW57
Y2KW57 is offline
Moderator
Join Date: Dec 2011
Posts: 10,900
Received 3,550 Likes on 1,862 Posts


The chart above is a jpg file, so technically speaking, it is a continuation of the slide show.
 
  #10495  
Old 03-21-2021, 10:13 AM
FordTruckNoob's Avatar
FordTruckNoob
FordTruckNoob is online now
Identifies as He/Him/Noob
Join Date: Jan 2005
Location: Henderson, NV
Posts: 10,887
Received 3,032 Likes on 2,002 Posts
Originally Posted by Y2KW57


The chart above is a jpg file, so technically speaking, it is a continuation of the slide show.
I use the Ultra Black for a lot of my oil-fouled gasketing needs. I try to clean the surfaces as much as I can of course but short of hot-tanking it, one can never really be sure of absolute cleanliness.
 
  #10496  
Old 03-21-2021, 10:17 AM
Dan V's Avatar
Dan V
Dan V is offline
Lead Driver
Join Date: Jun 2013
Location: north of Minneapolis, MN
Posts: 5,275
Received 610 Likes on 397 Posts
Originally Posted by FordTruckNoob
I use the Ultra Black for a lot of my oil-fouled gasketing needs. I try to clean the surfaces as much as I can of course but short of hot-tanking it, one can never really be sure of absolute cleanliness.
I'm partial to The Right Stuff....in the can.
 
  #10497  
Old 03-21-2021, 10:19 AM
FordTruckNoob's Avatar
FordTruckNoob
FordTruckNoob is online now
Identifies as He/Him/Noob
Join Date: Jan 2005
Location: Henderson, NV
Posts: 10,887
Received 3,032 Likes on 2,002 Posts
Originally Posted by Dan V
I'm partial to The Right Stuff.
Now you know why my jobs take so long. 75% of it is waiting for gasket to cure.
 
  #10498  
Old 03-21-2021, 04:21 PM
Sous's Avatar
Sous
Sous is online now
Fleet Owner
Join Date: May 2014
Location: Lake Hartwell, GA
Posts: 26,142
Received 4,584 Likes on 2,907 Posts
A rain storm rolled through last night at the beach, but we slept well and woke to the sound of ocean waves crashing on the beach.

I laid in bed most of the morning while Kate took the dogs to the beach. There is almost 4 miles of state park beach in front of us that is never busy. Hence one of the reasons why we like it here do much. It is a small community with no commercialization. The digs are free to run off leash, which is nice too.

The wind is up a bit, but we still had a great day and had dinner at McKonkey's Jungle Shack, which is a local favorite of ours. A 1/2 lbs hand patted burger, fried pickle chips, onion rings and fries are a great choice. Later in the week we will hit up Whaley's for a couple of cold beers, chicken wings and great atmosphere.

I sincerely hope everyone had a great weekend and your upcoming week is a good one.


 
  #10499  
Old 03-21-2021, 04:44 PM
cleatus12r's Avatar
cleatus12r
cleatus12r is offline
Butt-Head
Join Date: Apr 2004
Location: Reed Point, MT
Posts: 8,600
Received 2,059 Likes on 1,159 Posts
Originally Posted by Dan V
I'm partial to The Right Stuff....in the can.
I use so much of it I just buy the big caulk tubes. I LOVE IT FOR EVERYTHING.

The only real problem with it is that if it's used on thin tin (like 7.3L oil pans or early small block Chevy valve covers), forget about reusing it. It's not coming off without being destroyed.


 
  #10500  
Old 03-21-2021, 04:49 PM
SkySkiJason's Avatar
SkySkiJason
SkySkiJason is online now
Hotshot
Join Date: Jul 2008
Location: N.GA Mountains
Posts: 12,757
Received 2,041 Likes on 1,209 Posts
Originally Posted by BBslider001
https://youtu.be/rI01qKAqYts
Well this looks fun...in some twisted way LOL
Nope. **** that. I trust my team, but no need for the stakes to be that high. The Russians are nuts....
 


Quick Reply: *** The Official Superduty Morning Coffee Thread ***



All times are GMT -5. The time now is 09:02 PM.