No topic thread part 3-2017
Hotshot
Joined: Sep 2012
Posts: 17,708
Likes: 136
From: Calgary
Went to the auction to see how the online bidding works and its good for the auctioneer but I'll check in later and review the prices.
Picked up 150 board feet of 2x4 and a 3/4 sheet of 3/4" plywood from the dumpster in front of his place so I saved $125. Its not what you spend that counts, its what you save that matters.
Picked up 150 board feet of 2x4 and a 3/4 sheet of 3/4" plywood from the dumpster in front of his place so I saved $125. Its not what you spend that counts, its what you save that matters.
Thread Starter
|
Moderator
Joined: Dec 2003
Posts: 97,591
Likes: 2,008
From: Saskatoon, Saskatchewan
It`s pretty ironic that BC, Washington and Cal all need rain desperately with their forest fires out of control while you`ve had flooding this summer Shaun.
I like to recycle lumber as much as I can too, it saves trees and lumber ain`t cheap and it`s amazing what some peeps throw out.
I like to recycle lumber as much as I can too, it saves trees and lumber ain`t cheap and it`s amazing what some peeps throw out.
Hotshot
Joined: Sep 2012
Posts: 17,708
Likes: 136
From: Calgary
That's a fast turn around John, figured it would be a week or 10 days to do it.
It makes this shed project a lot easier to do Morris when you see 2 piles of lumber instead of 1.
It makes this shed project a lot easier to do Morris when you see 2 piles of lumber instead of 1.
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
Rezvani's Latest Post-Apocalytic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
2026 Shelby F-150 Off-Road: Better Than a Raptor R?
Brett Foote
Thread Starter
|
Moderator
Joined: Dec 2003
Posts: 97,591
Likes: 2,008
From: Saskatoon, Saskatchewan
How did your cross member install go today John? I had to really modify my inner fenders on my 53 resto rod tho I really hated to but there was no way around it. A month ago my good neighbour gave me an 87 and a 92 Grande Marquis cars. The 87 has the same front clip as on my 53 resto rod pus a good exhaust system that`s going on my 53. I still have a bit more to take off and now I`m thinking my sawzall is coming out tonight. 
Nice to have lots of material on hand when doing a project Perry. I hate having to go to town for more material, that usually wastes half my day and most of my ambition.
Nice to have lots of material on hand when doing a project Perry. I hate having to go to town for more material, that usually wastes half my day and most of my ambition.
FTE Legend
Joined: Oct 2005
Posts: 283,683
Likes: 8,269
From: northwestern Ontario
I haven't really been pushing myself too hard on this project and was waiting for new inside channels , the first ones they made were too wide to fit inside the frame rails they I ended up having to modify them so the motor mounts would work, then waiting for a day to paint everything. It was meant to be a winter project but now I'm hoping to get it back on the road before the end of the season and get an alignment so it's ready for next spring..
FTE Legend
Joined: Oct 2005
Posts: 283,683
Likes: 8,269
From: northwestern Ontario
How did your cross member install go today John? I had to really modify my inner fenders on my 53 resto rod tho I really hated to but there was no way around it. A month ago my good neighbour gave me an 87 and a 92 Grande Marquis cars. The 87 has the same front clip as on my 53 resto rod pus a good exhaust system that`s going on my 53. I still have a bit more to take off and now I`m thinking my sawzall is coming out tonight.
Nice to have lots of material on hand when doing a project Perry. I hate having to go to town for more material, that usually wastes half my day and most of my ambition.
Nice to have lots of material on hand when doing a project Perry. I hate having to go to town for more material, that usually wastes half my day and most of my ambition.
Lead Driver
Joined: Jun 2011
Posts: 5,510
Likes: 27
From: Winnipeg, Manitoba
Happy Sunday Mornin'all. Kalan's Team didn't play well this weekend at the Western Nationals, That team is finished for the year. Team Manitoba should do better at the Canadian Nationals in Woodstock next week. Have a great day guy's
