Hot start issues again....
Thread Starter
|
Tuned
Joined: Jan 2006
Posts: 293
Likes: 1
Ok, an update. I'm mobile again. I replaced all top injector oil seals on left bank and 3 resembled the pic I linked to earlier in this thread and the other one was cut almost all the way through. I'm impressed that it even ran. It would appear that the oil rail replacement was a complete waste as the Alliant rings were defective and will be warranteed. Thanks to all who contributed.
A couple things I've noticed. #1 Mileage is up considerably. #2 Oil/coolant temps are much closer. Apparently high pressure oil leaks generate a lot of heat.
A couple things I've noticed. #1 Mileage is up considerably. #2 Oil/coolant temps are much closer. Apparently high pressure oil leaks generate a lot of heat.
Thread
Thread Starter
Forum
Replies
Last Post
2004_6.0 powerstroke
6.0L Power Stroke Diesel
11
Jul 16, 2015 09:45 PM
