Dumb Header Question
Thread Starter
|
Laughing Gas
Joined: Feb 2011
Posts: 991
Likes: 6
From: Newberry Springs, CA
Dumb Header Question
Notice most of my questions are dumb??
I finally have the time and money set aside to potentially put headers on my truck (2000 F250 CC 2V). Picked the headers (Thorley 218YC's) but am having a few second thoughts.
Will headers make noticeable difference in the way the trucks runs/pulls? I currently pull my TH (9to 10K loaded) or boat (5k), and with the 5Star tuner it seems to do OK. With how labor intensive this job is, I am of the mind that unless there is a big difference in performance then maybe it's not worth it.
Or, maybe I'm just being a wimp.
Anyway, thoughts, opinions or experiences?
Thanks All.
I finally have the time and money set aside to potentially put headers on my truck (2000 F250 CC 2V). Picked the headers (Thorley 218YC's) but am having a few second thoughts.
Will headers make noticeable difference in the way the trucks runs/pulls? I currently pull my TH (9to 10K loaded) or boat (5k), and with the 5Star tuner it seems to do OK. With how labor intensive this job is, I am of the mind that unless there is a big difference in performance then maybe it's not worth it.
Or, maybe I'm just being a wimp.
Anyway, thoughts, opinions or experiences?
Thanks All.
FTE Leadership Emeritus
Joined: Jul 2002
Posts: 42,561
Likes: 423
From: Long Island USA
I know from my own experience that headers made a difference in the mid-to-high-end RPMs. So if you're towing and need the extra horses in the mid-to-high range, yeah, they will help.
How much? Dunno ...
How much? Dunno ...
Laughing Gas
Joined: Oct 2012
Posts: 794
Likes: 1
From: Ontario
^ you'll feel it definitely while pulling. Another thing is for being a 2000, the headers and studs are probably to the point where within the next few years you're going to need new ones anyways. Time to get it over with 
Laughing Gas
Joined: Oct 2003
Posts: 767
Likes: 132
From: Lynden, WA
I have no doubt your exhaust manifold bolts are about shot. Mine is an 04 and with 67k it had 5 broken studs. My headers resolved the broken bolt problem once and for all. The headers really helped the mid range power, towing it pulls very strong now. Well worth the effort to install headers, especially the Banks headers I have.
Elder User
Joined: Apr 2010
Posts: 619
Likes: 6
From: Steeler Country
My manifold studs were going bad so it was big job. When I replaced the Hedman with the newer Hedman set it wasn't hard so I would do it again. Go look at your stock y pipe and see the restriction then you won't question if it makes more power.
Elder User
Joined: Apr 2010
Posts: 619
Likes: 6
From: Steeler Country
Hedman was my pick but they had to be replaced due to a weak collector. I don't know if they still sell them or are just making replacements. New set is bigger and working fine.
Trending Topics
Thread Starter
|
Laughing Gas
Joined: Feb 2011
Posts: 991
Likes: 6
From: Newberry Springs, CA
I was initially going to try the hedman's, but they don't make a model with an EGR hook up (yes, I have one) =(
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
2026 Shelby F-150 Off-Road: Better Than a Raptor R?
Brett Foote
2027 Super Duty Carhartt Package First Look: 12 Things You NEED to Know!
Michael S. Palmer
Thread
Thread Starter
Forum
Replies
Last Post
