They'll know for sure.
Valvespring Tech
Thread Starter
|
Laughing Gas
Joined: Aug 2011
Posts: 1,116
Likes: 0
Valvespring Tech
Okay guys, got the cam and lifters ordered. Waiting for them to come in on Friday...not sure if I SHOULD have gotten the springs too..or if the springs are necessary for the comp 260h cam. the head only has 45,000 miles on it, so the springs are fairly fresh. Does anyone see a problem posing that the 260h may not get the "recommended" valvesprings? Has anyone used their stock valvesprings? just a few tidbits before deciding if i should go back to order them..I'll just have to scrounge a bit. 
Moderator
Joined: Dec 2007
Posts: 7,987
Likes: 104
From: Boise, Idaho
Definitely check with the manufacturer. They're going to know better than anyone. Most people on here are going to make educated guesses at best, and that's not what you want for your engine. Comp is really good about getting back on stuff like that in my experience.
Thread Starter
|
Laughing Gas
Joined: Aug 2011
Posts: 1,116
Likes: 0
Ok..thankfully the dummys at the auto store ordered a v8 cam..so I can go back to reorder with the valvesprings..now..can anyone help me? I'm lookin for the comp 260h cam kit WITH the valvesprings..but not Tue timing stuff? I've seen it..just can't find it. Any help appreciated!
Thread Starter
|
Laughing Gas
Joined: Aug 2011
Posts: 1,116
Likes: 0
Trending Topics
Moderator
Joined: Dec 2007
Posts: 7,987
Likes: 104
From: Boise, Idaho
When I was looking at kits, it was one that just came with the cam and lifters, or one that came with everything. I don't remember seeing one in between.
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
10 Things Every Truck Owner NEEDS (2026 Edition)
Michael S. Palmer
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
Thread Starter
|
Laughing Gas
Joined: Aug 2011
Posts: 1,116
Likes: 0
Well..I suppose I can get the cam and lifters..contact comp and see their specified springs and see if they have a "spring package" that comes with the locks and keepers and such. I decided just to keep the original timing gears..so that's 60$ ill save..or else I WOULD get the whole kit.
Thread Starter
|
Laughing Gas
Joined: Aug 2011
Posts: 1,116
Likes: 0
Alright..I got the FULL kit..now..it says that retainers are not included..but did you get new retainers AB? I'm officially in no mans land as nobody around me or helping me knows as much about the 300 as I do..and this whole cam swap and valvespring change is all new to me. I'm gonna get the fitting for the pressurized air for the valvesprings as I still don't wanna take off the head.
Moderator
Joined: Dec 2007
Posts: 7,987
Likes: 104
From: Boise, Idaho
I didn't get retainers, but I did hear they're the same as the 302, so you can get some of those. (May want to double check to confirm that).
But, retainers are one of the few items in the valve train that aren't really a "wear" item, so most of the time you can just reuse your old ones.
But, retainers are one of the few items in the valve train that aren't really a "wear" item, so most of the time you can just reuse your old ones.
Thread
Thread Starter
Forum
Replies
Last Post
bearster18
Small Block V8 (221, 260, 289, 5.0/302, 5.8/351W)
17
May 2, 2025 05:45 AM
HVACTOM
1973 - 1979 F-100 & Larger F-Series Trucks
5
Mar 13, 2015 09:34 AM
fordnut2008
FE & FT Big Block V8 (332, 352, 360, 390, 406, 410, 427, 428)
11
Aug 27, 2008 01:39 PM
oldblue31
FE & FT Big Block V8 (332, 352, 360, 390, 406, 410, 427, 428)
1
May 21, 2005 08:13 PM
fordtruckin
FE & FT Big Block V8 (332, 352, 360, 390, 406, 410, 427, 428)
6
Mar 7, 2002 08:38 PM
