Power window confusion
Thread Starter
|
Senior User
Joined: Sep 2011
Posts: 443
Likes: 0
Power window confusion
I have a 1991 F250 7.3 w AT and 4whld. I just bought the truck as a project, bc it had several small issues... Passenger side power window being one.
I have a reman motor, and two different switches and wireing blocks. The problem is it will always move downward but only sometimes will the motor turn when the "up" side of the switch is pressed....
Does anyone know what the wires are supposed to be (hot, ground) in "up" "down" and neutral position?
I have a reman motor, and two different switches and wireing blocks. The problem is it will always move downward but only sometimes will the motor turn when the "up" side of the switch is pressed....
Does anyone know what the wires are supposed to be (hot, ground) in "up" "down" and neutral position?
Thread Starter
|
Senior User
Joined: Sep 2011
Posts: 443
Likes: 0
Ok I found that's it's a ground issue (the red and black wire) now... Where is it grounded at?
Also my left rear blinker/brake light is not working and seems to be a ground issue.
Related?
Thanks for any help
Also my left rear blinker/brake light is not working and seems to be a ground issue.
Related?
Thanks for any help
Thread
Thread Starter
Forum
Replies
Last Post
randomguy
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
1
May 13, 2013 04:13 PM
ron's power stroke
1999 - 2003 7.3L Power Stroke Diesel
7
Apr 1, 2007 09:20 AM
