It's 2012 already??? BS Thread
FTE Chapter Leader
Joined: Mar 2005
Posts: 23,851
Likes: 9
From: Suppertown, MN
I would have brought you to lunch but you missed it cause I had lunch about 9:30 but I am heading to dinner here in about an hour if you would like to join me?
Never been to Don Pablos.
Fleet Owner
Joined: Mar 2003
Posts: 24,724
Likes: 74
From: Blue Hill Township
Pfft, lock the door. I am hungry and have been craving Don Pablos.
Come on down and we'll eat dinner at Don Pablos.
VT Chapter Ldr
Joined: Apr 2004
Posts: 96,102
Likes: 294
From: Orange, Vermont
Very marginal and bullet proof. Might snow some tomorrow with maybe rain. Going home to work on it actually. Hopefully get a few inches
FTE Chapter Leader
Joined: Mar 2005
Posts: 23,851
Likes: 9
From: Suppertown, MN
Ok I will be there in an hour! LOL
So whats the answer to the other questions that you quoted me on and didn't answer yet?
So whats the answer to the other questions that you quoted me on and didn't answer yet?
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
2026 Shelby F-150 Off-Road: Better Than a Raptor R?
Brett Foote
2027 Super Duty Carhartt Package First Look: 12 Things You NEED to Know!
Michael S. Palmer
10 Most Surprising 2026 Ford Truck Features!
Joe Kucinski
Fleet Owner
Joined: Mar 2007
Posts: 28,290
Likes: 6
From: BLT, MN
FTE Chapter Leader
Joined: Mar 2005
Posts: 23,851
Likes: 9
From: Suppertown, MN
Now that is funny!
VT Chapter Ldr
Joined: Apr 2004
Posts: 96,102
Likes: 294
From: Orange, Vermont
Got my upper shock mount bracket done last night. Made from 1" wide by 1/8" thick steel
[IMG]http://i1017.photobucket.com/albums/af300/mxzwild/2012-01-25_22-22-33_200.jpg[/IMG
Before installation
After installed
Should hold
[IMG]http://i1017.photobucket.com/albums/af300/mxzwild/2012-01-25_22-22-33_200.jpg[/IMG
Before installation
After installed
Should hold
Fleet Owner
Joined: Mar 2003
Posts: 24,724
Likes: 74
From: Blue Hill Township
They are not illegal when there are no other cars on the road.
ROFL!!!
VT Chapter Ldr
Joined: Apr 2004
Posts: 96,102
Likes: 294
From: Orange, Vermont
Thanks Jay. Not the prettiest but will work for now. Doesn't look complicated but a lot if cut and fitting in that area.
Sled repair is such a pandora box. I got the A arm bushings changed and pulled th pipe off to get access to a couple bolts and checked the Y pipe and there is a hole in the back. Lucky I haven't melted a piston yet. Now to take that off now and hopefully weld it
rr
Sled repair is such a pandora box. I got the A arm bushings changed and pulled th pipe off to get access to a couple bolts and checked the Y pipe and there is a hole in the back. Lucky I haven't melted a piston yet. Now to take that off now and hopefully weld it
rr
FTE Chapter Leader
Joined: Mar 2005
Posts: 23,851
Likes: 9
From: Suppertown, MN
Thanks Jay. Not the prettiest but will work for now. Doesn't look complicated but a lot if cut and fitting in that area.
Sled repair is such a pandora box. I got the A arm bushings changed and pulled th pipe off to get access to a couple bolts and checked the Y pipe and there is a hole in the back. Lucky I haven't melted a piston yet. Now to take that off now and hopefully weld itrr
Sled repair is such a pandora box. I got the A arm bushings changed and pulled th pipe off to get access to a couple bolts and checked the Y pipe and there is a hole in the back. Lucky I haven't melted a piston yet. Now to take that off now and hopefully weld it
rr