When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I've done a search but couldn't find any info on what years of Dodge spares you guys are using, and what vehicles had them. Spent a few hours in the local pull-a-part the other day looking for other stuff, and didn't find any that looked like these. I've got the drop beams on the front of my '70, and am wondering if these rum in the fenders or not.
The 20" spares were 02 to 08 dodge 1/2 ton trucks that CAME WITH the 20" wheel package.
Mine do not come even close to rubbing in the front. In the back I am running a 285/50/20 which is a big tire. I had to use a 1.5 inch billet spacer to get the wheel centered in the wheel-well. Otherwise, it would rub on the innermost part of the wheel-well. No rubbing anywhere.
I've done a search but couldn't find any info on what years of Dodge spares you guys are using, and what vehicles had them. Spent a few hours in the local pull-a-part the other day looking for other stuff, and didn't find any that looked like these. I've got the drop beams on the front of my '70, and am wondering if these rum in the fenders or not.
Oh, I found mine on ebay brand new $360 to my door. No tires of coarse; but I wanted to put new tires on any way to get the stagger look.
Oh, I found mine on ebay brand new $360 to my door. No tires of coarse; but I wanted to put new tires on any way to get the stagger look.
That is pretty upsetting I've been on ebay for a couple of months and haven't seen them being sold even individually. Still keeping my eyes open. I saw some on there last year for $200. Good find.
That is pretty upsetting I've been on ebay for a couple of months and haven't seen them being sold even individually. Still keeping my eyes open. I saw some on there last year for $200. Good find.
Here is they guy I got them from. I had to email him to see if he had four and what the total price would be. I have no idea if he has more than one. You might send him a message through ebay to find out.
These are the guys I got mine from. They are in Fort Worth and you might give them a call. I bought 5 for $190, they needed a sand blast but I powdercoated them so that did not matter. Drove up, paid, loaded in the civic and came home. 1 tank of gas saved $$ on shipping. Since you are in Oklahoma City they are a few hours south.
Wheel Vintiques series 14 with trim rings and 1942 center caps
Rear 15X10, 325/50/15
Front 15X7, 235/60/15
THAT.....THAT RIGHT THERE....thats what im talking about man.
That is one sexy rim brother. Thats the looking im going for and was hoping more people where running rims like those. Do you have any intsalled pics?
THAT.....THAT RIGHT THERE....thats what im talking about man.
That is one sexy rim brother. Thats the looking im going for and was hoping more people where running rims like those. Do you have any intsalled pics?
I don't have any pics with the caps and trim rings installed. I'm getting ready to disassemble my truck for body & paint. I don't even have the front rims painted yet. My truck has had a lot of serious modifcations and even though it's fast and driveable, it's still in the mock-up stage.
It's never fast enough, a 390" motor can be made pretty powerful. I got a tiny little 351C in mine, lower rpm's seem abit slow. I'm thinking about a msd box and a bottle to warm it up abit.
It's never fast enough, a 390" motor can be made pretty powerful. I got a tiny little 351C in mine, lower rpm's seem abit slow. I'm thinking about a msd box and a bottle to warm it up abit.
Before I put the drag radials on the rear, it would break the tires loose and drift sideways if I mashed the gas at 45 mph. I would have to lift or it would go all the way around. It would bark the tires and and get loose going into 3rd at 80 mph. It's plenty fast for me.