kenwood dnx install

Reply Subscribe

Thread Tools

Search this Thread

Oct 25, 2011 | 05:53 AM

havns3

Thread Starter

Senior User

Joined: Sep 2006

Posts: 187

Likes: 0

From: northeast missouri

kenwood dnx install

ok i have dnx 7100 to install in my 2004 f 250 x cab. i have the radio, mounting sleeve, and the sirius add on module . it didnt come with a trim ring.

what i am needing is a company name and part number for the radio wiring to truck wiring adapter and a dash install kit. maybe even a direct connection wiring adapter, one with the kenwood end on one end and the ford factory end on the other. any help would be apreciated

Oct 25, 2011 | 07:38 AM

senix

Super Moderator

Joined: Aug 2008

Posts: 37,379

Likes: 1,863

From: Frederick, MD

PM me your e-mail address and I have a file that was sent to me for mine. Although mine is an 08 it should give you what you need.

Nov 4, 2011 | 05:12 AM

havns3

Thread Starter

Senior User

Joined: Sep 2006

Posts: 187

Likes: 0

From: northeast missouri

well finally got time to install the kenwood. pics to follow, now i have another question. I went to the kenwood support page and down loaded the software update file. it downloaded as a winzip file, no problem i have winzip. but when i go to extract the file to my thumb drive it still shows the file as a winzip. according to the kenwood directions i am suppossed to put this file k07v_update_1.0.9.tar.gz/ at the top of the file directories on the thumb drive. that is the file name that shows in winzip program but when i move it to the ythumbdrive it drops the gz at the end and calls it winzip update_1.0.9.tar what am i doing wrong?