E-Brake cable
Thread Starter
|
Lead Driver
Joined: Sep 2005
Posts: 9,399
Likes: 188
From: Norco,CA
E-Brake cable
I have e99 CC LB 4x4 and I can't find out how to adjust the cable. I put in new brakes and e-brakes also and the cable is tight. I've traced it back down the frame and there is no place to adjust it. When I push on it, it clicks one time and is very hard. It was this way before I replaced the brakes also. I'd like to get the padel at least in the half way area. Thanks,
Chet
Chet
Lead Driver
Joined: Jun 2003
Posts: 8,298
Likes: 24
From: Damon (South East Texas)
I would back off the adjusters of the e-brake shoes. It seems to be the only point of adjustment in my Ford manual also. Mine is pretty tight too. I never use the e-brake that much with my automatic, but do use it on occasion when working on the truck while in neutral.
Thread Starter
|
Lead Driver
Joined: Sep 2005
Posts: 9,399
Likes: 188
From: Norco,CA
Matt. if your talking about the star adjuster that adjusts the shoes I've done all that. There has to be some place to loosen the cable in order to install a new cable when it breaks. TO give it slack, I just can't find it. Thanks guys all your input its apprecialted!
Chet
Chet
Thread
Thread Starter
Forum
Replies
Last Post
JHoffman93
Pre-Power Stroke Diesel (7.3L IDI & 6.9L)
2
Dec 23, 2009 09:19 PM
