When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hey all, just curious if your productivity screens display your current bearing and temp...like the photo here (screen grab from Ford) my sig truck does not...I do have the nav, is that why? Can i get these added? Dealer flash? Thank you for your reply.
My 2011 with Nav shows the NEWS direction as shown but the OAT is on the climate control read out. The OAT on the main screen must be new feature.
Thanks Miner...its bizarre, picked up my '15 today, but no go on the NEWS/OAT. hmmmm, dealer will have more data on monday, but am curious what others are seeing.
I'm still learning about my truck its a new to me 2011. But have you tried switching the +/- manual gear change on the shift lever? That switch turns things on and off like the gear indicator. Maybe try that?? Also it depends what screen you have switched on to show the NEWS sometimes.
My 2011 had the Temp and Direction in the cluster since it was an XLT and no Nav radio. Can't say the upper models had the Temp and Direction on the radio screen.
I know the 2015 does not have the Temp and Direction in the cluster since the 8" screen has the Temp displayed in the top center of the screen and the Direction in the upper right Quadrant if you are on the home screen of the radio. If on the Nav screen, the Direction is displayed next to the Temp on the top line.
Thanks guys. Mine is on the nav too (direction and temp)...just wanted to make sure I wasn't missing anything. Have a good night. Cold here...headed for single digits. Not Canada cold, but cold for Kansas.
