Know what I hate?
FTE Chapter Leader
Joined: May 2006
Posts: 11,273
Likes: 99
From: North Dakota
O I guess I should have said its not my redneck pool, I have one of them cheap 16 ft diameter 42 inch tall round ones with a blowup ring at the top. They try n crawl I. The side, n pull it down, releasing a lot of water.
i ain't rite
Joined: Mar 2005
Posts: 65,492
Likes: 5,552
From: Marlboro Mental Hospital.
no tresspassing signs on cattle fence around property,
and have the cattle fence wired into a mat around the pool. if they get past the fence, they will get zapped at the pool.
and have the cattle fence wired into a mat around the pool. if they get past the fence, they will get zapped at the pool.
FTE Chapter Leader
Joined: May 2006
Posts: 11,273
Likes: 99
From: North Dakota
I do have a electric fence on part of the property. But not where they are coming in. SO in 100* weather I added a yellow ribben across where they come across. There is metal in the ribbon, n I hooked it to the fence 
we will see how that works. Lol.
we will see how that works. Lol.
i ain't rite
Joined: Mar 2005
Posts: 65,492
Likes: 5,552
From: Marlboro Mental Hospital.
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
2026 Shelby F-150 Off-Road: Better Than a Raptor R?
Brett Foote
2027 Super Duty Carhartt Package First Look: 12 Things You NEED to Know!
Michael S. Palmer
Post Fiend
Joined: Oct 2003
Posts: 6,949
Likes: 1
From: utica il
grinders are a nice quick way to see what the inside of your knuckles look like as well. found that out first hand with a bench grinder at an old job, slow rpm's too, but it still took off a hunk of finger 
Post Fiend
Joined: Oct 2003
Posts: 6,949
Likes: 1
From: utica il
not really sure why i didn't have gloves on, i was working in a steel shop at the time and all of the stock had rough/sharp edges, and i almost always wear gloves because my hands refuse to roughen up and get calloused. played guitar daily for 13+ years and my finger tips are still as soft as a babies, it's kind of odd.