2000 window issue
Thread Starter
|
Senior User
Joined: Apr 2005
Posts: 392
Likes: 0
From: NC
2000 window issue
my drivers window dosent know when to stop. one touch down works fine untill the window is down all the way, and the motor keeps running untill you hit up to stop it. and it will do the same in the upmost position too. any ideas
Fleet Owner
Joined: Apr 2008
Posts: 24,324
Likes: 5,136
From: 0,0,1
To work, the OTD circuit requires the motor to lockup which increases the current draw. When it senses this increase in current, it drops out the relay to cut-off the power to the motor. Since your motor "keeps running", something is slipping and the motor doesn't lockup to increase the current to make the relay cut-off the power. I guess it's possible the motor gear has stripped enough to allow slippage but not enough to keep the motor from operating the window.
Thread
Thread Starter
Forum
Replies
Last Post
LARIAT 85
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
6
Mar 26, 2013 07:38 AM
boggerted
1987 - 1996 F150 & Larger F-Series Trucks
4
Mar 18, 2010 02:32 PM
a64armt
1997 - 2006 Expedition & Navigator
6
Jun 1, 2006 07:38 PM
