its running!!
Thread Starter
|
New User
Joined: Jan 2010
Posts: 23
Likes: 0
its running!!
Hello all
Well finally running . Still dont know exactly what was the problem, because when I chaged the control modual on the side of the distirbutor I messed the timing up. Missed it by one tooth .
So everything I did after that may have not been needed.
Live and learn I guess. Learned alot from the guy who came over and helped.
But one thing ,we still never got any codes out of it ,use a real good one and a small hand held code reader ,nother from either one .
Thanks for all the help .
Jeff /wizzerd dad
Well finally running . Still dont know exactly what was the problem, because when I chaged the control modual on the side of the distirbutor I messed the timing up. Missed it by one tooth .
So everything I did after that may have not been needed.
Live and learn I guess. Learned alot from the guy who came over and helped.
But one thing ,we still never got any codes out of it ,use a real good one and a small hand held code reader ,nother from either one .
Thanks for all the help .
Jeff /wizzerd dad
Thread
Thread Starter
Forum
Replies
Last Post
