December chat
#196
#204
Join Date: Dec 2005
Location: Chino Valley, Arizona
Posts: 9,285
Received 3,697 Likes
on
1,136 Posts
If I remember correctly the full moon is tonight, so it will be a blue moon new years eve.
well heck it is the internet here is a link I found.
SPACE.com -- Tonight's Blue Moon: All a Big Mistake
well heck it is the internet here is a link I found.
SPACE.com -- Tonight's Blue Moon: All a Big Mistake
#206
Busy, i was able to get my 66 about half done. i got the spindle's on, the new disc and calipers on, the brake hose brackets on, the power booster on, master brake booster on, the new left tie rod on, the alignment within a 1/6th inch from front to back, I did it with a straight edge on the rotors and a tape measure, it worked out slick!
i still need to run the vacuum to the booster, mount the porp valve and run all the hard lines. i'm going to try to bend them myself, that should be fun! i think i'm going to make some coat hanger patterns and match them up. all and all, it was a good day!
Happy New year to all my FTE friends!
i still need to run the vacuum to the booster, mount the porp valve and run all the hard lines. i'm going to try to bend them myself, that should be fun! i think i'm going to make some coat hanger patterns and match them up. all and all, it was a good day!
Happy New year to all my FTE friends!
Thread
Thread Starter
Forum
Replies
Last Post