steeringwheel
Thread Starter
|
New User
Joined: Oct 2009
Posts: 13
Likes: 0
steeringwheel
Wil a ranchero steering wheel fit in a f350 1983 ?
I am looking for an original steeringwheel but in the netherlands is that impossible . Now ther is a ranchero wheel for sale thats why i have this question.
I am looking for an original steeringwheel but in the netherlands is that impossible . Now ther is a ranchero wheel for sale thats why i have this question.
Moderator
Joined: Nov 2007
Posts: 22,415
Likes: 92
From: Denver Metro Area, CO
If they are from the same generations of vehicles, then most likely yes, it will work. Needs
to have a round hub (not square) and can't have an air bag. The last Ranchero I'm familiar
with is from the late 1970s and was based on the LTD II; the earlier ones were based on
the Torino. I would think that a wheel from that vehicle should work just fine in your 1983
truck. Even from an earlier Ranchero, down to 1970, should work.
1970 is when Ford began using column-mounted ignition lock cylinders in their cars; 1969
and prior had them on the dash. 1969 and prior wheels *may* work but I really don't know,
you'd have to try it and see.
In the mid 80s, they started installing air bags in the steering wheels of some cars, and
some cars had turn-signal-stalk controls for things like headlights & wipers; those wheels
have big, square-ish hubs and I can't imagine they'll work for your 1983 truck. I think they
started doing this in trucks in 1987.
to have a round hub (not square) and can't have an air bag. The last Ranchero I'm familiar
with is from the late 1970s and was based on the LTD II; the earlier ones were based on
the Torino. I would think that a wheel from that vehicle should work just fine in your 1983
truck. Even from an earlier Ranchero, down to 1970, should work.
1970 is when Ford began using column-mounted ignition lock cylinders in their cars; 1969
and prior had them on the dash. 1969 and prior wheels *may* work but I really don't know,
you'd have to try it and see.
In the mid 80s, they started installing air bags in the steering wheels of some cars, and
some cars had turn-signal-stalk controls for things like headlights & wipers; those wheels
have big, square-ish hubs and I can't imagine they'll work for your 1983 truck. I think they
started doing this in trucks in 1987.
Elder User
Joined: Jan 2005
Posts: 561
Likes: 2
From: Willow River B.C.
8 lug 6.50 bolt circle began in 1953 on F250's and in 1967 on F350's.
Airbags in f-series started in 1994.
I'm going to be pulling the stock steering wheel off my 84 f-250 pretty soon in favour of something else....
Scott
Airbags in f-series started in 1994.
I'm going to be pulling the stock steering wheel off my 84 f-250 pretty soon in favour of something else....
Scott
Thread
Thread Starter
Forum
Replies
Last Post
DarkStarMedia
1994.5 - 1997 7.3L Power Stroke Diesel
6
May 20, 2012 12:03 AM
lightninquick
1967 - 1972 F-100 & Larger F-Series Trucks
3
Dec 15, 2011 04:08 AM
Person25
Audio & Video Systems, Navigation, Satellite Radio & Mobile Electronics
2
Jan 3, 2011 11:08 AM
rangerdanger27
1987 - 1996 F150 & Larger F-Series Trucks
3
Nov 11, 2010 07:38 PM
cpryor
Audio & Video Systems, Navigation, Satellite Radio & Mobile Electronics
5
Aug 26, 2006 05:49 AM
