Hi everyone,

I have a '97 F250 with an E4OD in it. I am just now reading that these trannies are kind of notorious for getting hot and leaking from the front seal.

Long story short, the tranny is out and the pump bolt seal, the O-ring seal and converter hub seal have been replaced. We need the torques specs for the front pump bolts before we can go any further.

I have searched online for hours and cannot find the info anywhere.

If anyone can help it would be greatly appreciated.

Thanks so much

 

I hope this helps with what you are looking for.

 

Thanks so much, the pump body to case was exactly what we needed!