confused by racetrack trim
Thread Starter
|
New User
Joined: May 2009
Posts: 14
Likes: 0
Bill, you are my hero !!!
Your tips were spot on and I got both the mouldings I need!!!
Prices were VERY civil for original parts, 39.- for the RH and 85.- for the left hand... Shipping is about a 100 bucks each due to the size, but still, I'm happy to have gotten the trim!!! My truck will look soo awesome! It's coming out of paint next week and will all the trim it will look like new
How did you look the part numbers up? The very last piece I am missing is the molding, cab corner (the trim that goes under the rear cab window) and again I am wondering if I need a specific and rare one for the supercab model !!
Your tips were spot on and I got both the mouldings I need!!!
Prices were VERY civil for original parts, 39.- for the RH and 85.- for the left hand... Shipping is about a 100 bucks each due to the size, but still, I'm happy to have gotten the trim!!! My truck will look soo awesome! It's coming out of paint next week and will all the trim it will look like new
How did you look the part numbers up? The very last piece I am missing is the molding, cab corner (the trim that goes under the rear cab window) and again I am wondering if I need a specific and rare one for the supercab model !!
Ford Parts Specialist
Joined: Nov 2006
Posts: 88,826
Likes: 784
From: Simi Valley, CA
Bill, Your tips were spot on and I got both the mouldings I need!!!
Prices were VERY civil BARGAINS! for original NEW parts, 39.- for the RH and 85.- for the left hand... Shipping is about a 100 bucks each due to the size, but still, I'm happy to have gotten the trim!!! My truck will look soo awesome! It's coming out of paint next week and will all the trim it will look like new
How did you look the part numbers up? The very last piece I am missing is the molding, cab corner Ford: Back Belt (the trim that goes under the rear cab window) and again I am wondering if I need a specific and rare one for the supercab model !!
Prices were VERY civil BARGAINS! for original NEW parts, 39.- for the RH and 85.- for the left hand... Shipping is about a 100 bucks each due to the size, but still, I'm happy to have gotten the trim!!! My truck will look soo awesome! It's coming out of paint next week and will all the trim it will look like new
How did you look the part numbers up? The very last piece I am missing is the molding, cab corner Ford: Back Belt (the trim that goes under the rear cab window) and again I am wondering if I need a specific and rare one for the supercab model !!
D3TZ10423A20A .. Right (Passenger Side) Back Belt Moulding / Obsolete
Fits: All 1973/79 F100/350's (Regular/Super/Crew Cabs).
WESLEY OBSOLETE PARTS in Liberty KY has ONE: 606-787-5293.
GREEN SALES COMPANY in Cincinnati OH has ONE: 800-543-4959.
NOS PARTS SOURCE in Lenexa KS has ONE: 913-220-5746.
Try WESTLEY first, the others will prolly he more expensive.
No one else has any.
--------------------
D3TZ10423A21A .. Left (Drivers Side) Back Belt Moulding.
Fits: 1974/79 F100/350 all Super Cabs.
Use without in-cab Fuel Tank on 1973/77 F100/350 Regular & Crew Cabs.
Fits: 1978/79 F100/350 Regular & Crew Cabs.
JOE HAYWARD FORD in The Dalles OREGON has ONE.
WESLEY OBSOLETE PARTS has ONE.
NOS PARTS SOURCE has ONE.
MILLER OBSOLETE PARTS in Binghamton NY has ONE: 800-546-7278
BOB ALLEN FORD in Overland Park KS has ONE: 800-676-0675.
GREEN SALES CO. has FOUR.
No one else has any.
Try HAYWARD first, the others will prolly be more expensive. The shipping charges will be much less...and if you're nearby, you can drive over there and get it.
Post Fiend
Joined: Jan 2006
Posts: 5,037
Likes: 9
From: Kasson, Minnesota
I can't believe shipping was $100 for each of those trim pieces. Yes, I know they are large, but light as a feather.
I was able to score some racetrack pieces for my reg cab, but they are not perfect. I just needed pieces in order to get all my holes drilled in order to mount them. Once I get everything mounted, then I'll have to get piece by piece. Some pieces I have are pretty good though and I may not need all of them. But I do need the lower track bed pieces that you got. I'm just kinda holding out a bit to find used, nice and cheaper if that is even possible.
I was able to score some racetrack pieces for my reg cab, but they are not perfect. I just needed pieces in order to get all my holes drilled in order to mount them. Once I get everything mounted, then I'll have to get piece by piece. Some pieces I have are pretty good though and I may not need all of them. But I do need the lower track bed pieces that you got. I'm just kinda holding out a bit to find used, nice and cheaper if that is even possible.
Ford Parts Specialist
Joined: Nov 2006
Posts: 88,826
Likes: 784
From: Simi Valley, CA
I can't believe shipping was $100 for each of those trim pieces. Yes, I know they are large, but light as a feather.
I was able to score some racetrack pieces for my reg cab, but they are not perfect. I just needed pieces in order to get all my holes drilled in order to mount them. Once I get everything mounted, then I'll have to get piece by piece. Some pieces I have are pretty good though and I may not need all of them. But I do need the lower track bed pieces that you got. I'm just kinda holding out a bit to find used, nice and cheaper if that is even possible.
I was able to score some racetrack pieces for my reg cab, but they are not perfect. I just needed pieces in order to get all my holes drilled in order to mount them. Once I get everything mounted, then I'll have to get piece by piece. Some pieces I have are pretty good though and I may not need all of them. But I do need the lower track bed pieces that you got. I'm just kinda holding out a bit to find used, nice and cheaper if that is even possible.
The right quarter panel moulding, D7TZ9929038DA is an oddball. It was only used on trucks with the tool compartment.
The tool comparment has a separate moulding on it. The R/T moulding only butts up to the tool box then continues along the quarter panel.
To buy a rare NOS right side D7TZ9929038DA moulding today for only 39 bucks is amazing. That was prolly the ORIGINAL list price.
Excessive shipping charges, or not?
When Ford shipped these long mouldings to the dealers, they taped two pieces of wood to the package to prevent the moulding from getting bent.
When the mouldings arrived, the wood was removed, because the mouldings would not fit into the moulding racks with it.
If wood was added to the mouldings to ship them to the OP, the price, considering the time and effort to do this, IMO...isn't that excessive.
Then there's this: If the mouldings are oversized by UPS standards (and I believe they are)...the price goes waaay up.
Thread
Thread Starter
Forum
Replies
Last Post
Rudytown
1973 - 1979 F-100 & Larger F-Series Trucks
10
Jul 13, 2017 11:31 AM
79 F-150 Stone
1973 - 1979 F-100 & Larger F-Series Trucks
11
Mar 19, 2017 01:09 PM
HpCowboy13
1973 - 1979 F-100 & Larger F-Series Trucks
16
Oct 19, 2015 09:03 PM
