engine lite
Thread Starter
|
New User
Joined: Feb 2009
Posts: 2
Likes: 0
engine lite
f-250 ,02 v10 85,000 miles.The engine light comes on while towing. The light will go off after towing. Seem to be using oil. Had the fuel pump replaced once. Plugs replaces and injectors cleaned. Truck seems to run fine. Whats going on. Would a coder be a good thing to have?
FTE Leadership Emeritus
Joined: Jul 2002
Posts: 42,561
Likes: 423
From: Long Island USA
You really have to read the codes to find out what the computer is complaining about.
Not sure about what code reader to use on the V10, but you could get a place like Autozone to try reading them for free.
Not sure about what code reader to use on the V10, but you could get a place like Autozone to try reading them for free.
Post Fiend
Joined: May 2006
Posts: 10,007
Likes: 4
From: Central Florida
Any gas OBD2 reader with a ford module should work fine. The ford module isn't strictly needed, but it's nice to view OEM specific faults.
The problem could be many things, reading the codes would be the easiest way to find out.
The problem could be many things, reading the codes would be the easiest way to find out.
Thread
Thread Starter
Forum
Replies
Last Post
Franksporttrac
Explorer, Sport Trac, Mountaineer & Aviator
6
Jun 5, 2012 12:02 PM
goldsmje
1999 - 2003 7.3L Power Stroke Diesel
41
Nov 15, 2009 07:12 PM
