Props to DIY and PHP!!
Thread Starter
|
Post Fiend
Joined: Apr 2004
Posts: 12,835
Likes: 3
From: Silver Lake Dunes, MI
Props to DIY and PHP!!
Well I can now say with first hand experience that Jim Rose from RDS/DIY injector as well as Bill and Corey from Power Hungry are top notch folks to deal with!
Jim rebuilt a set of AB for one of my customers truck and did a great job as well offering me many options on repair/cost! Thank you Jim!! Truck runs great!!
And Bill and Corey from PHP reprogrammed a PCM and FICM from a 6blow for me and have been great to deal with! I opened the box and looked at the invoice and it seems they cut me a great deal and also send a BUNCH of swag including some candies that we all enjoyed this afternoon!
Both companies were easy to get ahold of by phone, email and PM.
THANK YOU BOTH!!!
Jim rebuilt a set of AB for one of my customers truck and did a great job as well offering me many options on repair/cost! Thank you Jim!! Truck runs great!!
And Bill and Corey from PHP reprogrammed a PCM and FICM from a 6blow for me and have been great to deal with! I opened the box and looked at the invoice and it seems they cut me a great deal and also send a BUNCH of swag including some candies that we all enjoyed this afternoon!
Both companies were easy to get ahold of by phone, email and PM.
THANK YOU BOTH!!!
Thread Starter
|
Post Fiend
Joined: Apr 2004
Posts: 12,835
Likes: 3
From: Silver Lake Dunes, MI
No its far from running!! The FICM is questionable. Bill said it took 6 tries for it to take the reprogram and that last time he saw that the FICM had a bad coil and I still have a bunch of codes! The owner is bringing over his spare plow truck with the 6.0 so we can get known good parts to start swapping. It will be at the shop all week I am afraid! I HATE 6.0's!! Especially when they are a Heinz 57 mix put together by a high school kid that knows enough to be VERY dangerous!
Thread Starter
|
Post Fiend
Joined: Apr 2004
Posts: 12,835
Likes: 3
From: Silver Lake Dunes, MI
No beer for me and the green goodness (mountain dew) can only do so much! I probably wouldn't hate them so much if I knew them a little better. This one will help me though! Just like the 05 Dodge 5.9 CR last week! Be glad you have HEUI rather than a 5.9 CR! Them injectors are just as expensive as new Ford injectors! And when 6 of them leak the truck don't start!
Lead Driver
Joined: May 2007
Posts: 8,608
Likes: 13
From: Belair md
well i dont like beer either, but i also hate mountain dew...yuck!
one more quick thing to check on your 6.0, your scanner should have a pid called "FICM SYNC" its a yes or no pid, see what it says, yes is good, no is fried. most techs overlook that simple pid.
one more quick thing to check on your 6.0, your scanner should have a pid called "FICM SYNC" its a yes or no pid, see what it says, yes is good, no is fried. most techs overlook that simple pid.
Thread Starter
|
Post Fiend
Joined: Apr 2004
Posts: 12,835
Likes: 3
From: Silver Lake Dunes, MI
I looked at that today and it was a no but the batteries are also quite low. So they were charging at the time but still quiet low. Monday we are going to put the known good FICM on and see what happens
Trending Topics
Former Vendor
Joined: Apr 2008
Posts: 268
Likes: 0
From: Beautiful Winder, GA
UPS came and went, and when Bill finally got it to program, we got it boxed up and called our UPS guy to find out where he was so we could take it to him.Well I can now say with first hand experience that Jim Rose from RDS/DIY injector as well as Bill and Corey from Power Hungry are top notch folks to deal with!
Jim rebuilt a set of AB for one of my customers truck and did a great job as well offering me many options on repair/cost! Thank you Jim!! Truck runs great!!
And Bill and Corey from PHP reprogrammed a PCM and FICM from a 6blow for me and have been great to deal with! I opened the box and looked at the invoice and it seems they cut me a great deal and also send a BUNCH of swag including some candies that we all enjoyed this afternoon!
Both companies were easy to get ahold of by phone, email and PM.
THANK YOU BOTH!!!
Jim rebuilt a set of AB for one of my customers truck and did a great job as well offering me many options on repair/cost! Thank you Jim!! Truck runs great!!
And Bill and Corey from PHP reprogrammed a PCM and FICM from a 6blow for me and have been great to deal with! I opened the box and looked at the invoice and it seems they cut me a great deal and also send a BUNCH of swag including some candies that we all enjoyed this afternoon!
Both companies were easy to get ahold of by phone, email and PM.
THANK YOU BOTH!!!
Have to agree with you -- we've had nothing but good experiences with Jim, and you are so very
, Tim! I love throwing in extra goodies for an unexpected treat when customers open their boxes. And who doesn't like candy?!? 
Let us know if you need anything else, and have a spectacular weekend!
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
Top 10 Fords at 2026 Carlisle Ford Nationals
Joe Kucinski
3 Best / 3 Worst Parts of Modern Ford Ownership
Brett Foote
10 Amazing Upgrades That Solve Common Ford Truck Owner Headaches
Pouria Savadkouei
Every 2026 Ford Engine Explained
Brett Foote
10 Ugly Ford Trucks That We Still Kinda Love
Joe Kucinski
10 Things Every Truck Owner NEEDS (2026 Edition)
Michael S. Palmer
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Elder User
Joined: Jul 2007
Posts: 893
Likes: 0
From: Lawrenceburg, TN
Wow sounds like from what Ive been hearing I will be doing my business with PHP when the time comes. I like candy!
I can agree with Tim on Jim from RDS, great guy to deal with.
This sounds like a winning combination for PSD performance!
I can agree with Tim on Jim from RDS, great guy to deal with.
This sounds like a winning combination for PSD performance!
but I know Jim from RDS is a great guy. Thanks for the tips Tim.
Thread
Thread Starter
Forum
Replies
Last Post
corey1981
1987 - 1996 F150 & Larger F-Series Trucks
21
Sep 4, 2015 06:54 AM
Muktown
1994.5 - 1997 7.3L Power Stroke Diesel
4
Jan 26, 2010 11:22 AM
bfife
1999 - 2003 7.3L Power Stroke Diesel
20
May 13, 2009 10:52 PM