what to do... how does it work??
Thread Starter
|
Senior User
Joined: Aug 2007
Posts: 349
Likes: 1
From: Ohio
what to do... how does it work??
ok, so i'm tryin to get pics up here but its not workin. putting the pictures in my gallery. well, my problem is that when i was changin my brake lines, the brass block on the rear axle came off. so the threaded piece that goes from in the block to in the axle busted off. i got the broken piece out of the axle but when i hold the block up, it lookes as if there is no threads in it and that the busted piece goes all the way through this block and is part of the fittin thing that attaches to the breather tube.. is this correct? any help is appriciated
gallery pictures of it
oh, would u recomend to fix it or to replace.... i suppose that they are obsolete now and that one would probably be a job for number dummy though
gallery pictures of it
oh, would u recomend to fix it or to replace.... i suppose that they are obsolete now and that one would probably be a job for number dummy though
Laughing Gas
Joined: Dec 2007
Posts: 1,052
Likes: 2
From: Alvarado, TX
You're right. It's a nipple that passes through the junction block and threads into the axle housing to attach the block and and vent hose. I would try the wrecking yard because I belive its just 1/8" pipe thread and you could probably find something on a later truck if you bring the broken pieces to match up.
Senior User
Joined: Dec 2005
Posts: 364
Likes: 0
From: Southern Delaware
Couldnt you make something from a 1.5" 1/8 pipe thread and a couple fittings. I know its just a vent, but it also anchors the brake line "tee". You could just put a 1/8" nipple in the axle and find another way to attach the brake tee/block to the axle.I suggest this since the one off of the Junkyard diff may not be in better condition than the one that broke. It you create one new, it would have less a chance of breaking. Oh, btw I just found one off of a 9" the other day in one of drawers in the garage, I wonder if that would work...
Laughing Gas
Joined: Dec 2007
Posts: 1,052
Likes: 2
From: Alvarado, TX
I thought of that too, maybe a nipple, a coupling to hold the tee down and another nipple to clamp the vent line to. However its such a common setup you should be able to find something relatively new that will work. My '75 Higyboy, '68 Cougar, and '02 Superduty are all similiar if not identical.
Thread Starter
|
Senior User
Joined: Aug 2007
Posts: 349
Likes: 1
From: Ohio
is there any way i can make something that will work or will i have to buy one... my reasoning for bringin this back up is just cuz of goin to a junk yard, how do i know its not gonna be rusted on the inside such as mine was... just wanting to get this all clarified
Laughing Gas
Joined: Dec 2007
Posts: 1,052
Likes: 2
From: Alvarado, TX
Have you tried a parts house yet? Like I said, it's such a common setup that it might not be hard to find something that matches even if they don't have a listing for your truck.
Trending Topics
Thread Starter
|
Senior User
Joined: Aug 2007
Posts: 349
Likes: 1
From: Ohio
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
10 Things Every Truck Owner NEEDS (2026 Edition)
Michael S. Palmer
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
Laughing Gas
Joined: Dec 2007
Posts: 1,052
Likes: 2
From: Alvarado, TX
I would start with that. Bring your broken pieces to match up and try to avoid the big chain stores with geeks that wrap their head around anything thats not obvious in the computer. A mom 'n pop would be more helpful.
Post Fiend
Joined: Jul 2004
Posts: 8,786
Likes: 28
From: Northern California
The Brass Block is a part of the Rear Brake Hose
If you need a new block you have to replace the hose. The Hose is the Same For 1973-1977 F-250 HighBoys. Avaliable almost anywhere.
As for the fitting that goes into the axle, through the block, to the axle vent nipple. You can go to a hardware store and make one very easily.
If you need a new block you have to replace the hose. The Hose is the Same For 1973-1977 F-250 HighBoys. Avaliable almost anywhere.
As for the fitting that goes into the axle, through the block, to the axle vent nipple. You can go to a hardware store and make one very easily.
Thread
Thread Starter
Forum
Replies
Last Post
bobj49f2
1948 - 1956 F1, F100 & Larger F-Series Trucks
216
Aug 9, 2025 09:32 AM
jayro88
Pre-Power Stroke Diesel (7.3L IDI & 6.9L)
19
Feb 15, 2016 04:23 PM
Spool&Go
1999 - 2003 7.3L Power Stroke Diesel
203
Dec 16, 2011 08:32 AM
Monsta
User Gallery & Picture Display
1
Jan 19, 2009 02:38 PM
