When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Lisa......doubtful they will offer full asking price. As a buyer in this market......that's just......weird. BUT......just counter-offer with whatever they plop on the table, and see what happens. Good luck to you
I think Scott(cookie) might have posted about the polish
Chris, I think you're right. It was someone that had just returned from a National event of some sorts. Jeremy had been to some truck stuff and I think Scott went to a NHRA event within the same few weeks or days of each other.
Who posted the link to the Master Formula metal polish? Was it Jeremy? I ordered some and got it yesterday. Gonna try it on my 22.5 Alcoa wheels on the bus. Will tell everyone what I think. Over the years I've used just about every polishing product known to man.
If it don't work I'll try to find the stuff I once used on my fuel tanks and dump boxes (was always to cheap to buy aluminum wheels) that worked great although a bit pricey
In the recent years I have always had good luck with Neverdul on stainless and aluminum
If it don't work I'll try to find the stuff I once used on my fuel tanks and dump boxes (was always to cheap to buy aluminum wheels) that worked great although a bit pricey
In the recent years I have always had good luck with Neverdul on stainless and aluminum
Ray, I've used lots of Neverdul, too damn much work. In fact I need a 15 year old kid to do this job for me. It takes me about a week to do just 1 wheel.
I failed to post that I have finally gotten the Vdub running perfect. With a lot of help from 2 members here. Kwik, and Mega Jim. I forgot to mention Chris, Just another truck. But attached here is the secret to the perfect air/fuel ratio mixture. 45% is considered perfect, I set mine at the one displayed here because it is a little bit on the lean side and Dan said these motors prefer to be a little lean and of course I am searching for the best mpg I can coax out of it.l
We had a customer come in, he was overclocking his pc and wanted better temps. we dropped 1000+ of parts in and 300+ in labor to put it all in. Koolance is mid to top end right now. I used a CPU block and a pump/reservoir from them. Blue coolant and UV lights made it look nice, and man did that guy have nice parts inside that PC. I need a new PC as well as mine is 1 1/2 years old. New truck is kinda taking all the money right now, I NEED MONEY!
When I water cooled my PC, it wasnt such a great experience......
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
2026 Shelby F-150 Off-Road: Better Than a Raptor R?
Brett Foote
2027 Super Duty Carhartt Package First Look: 12 Things You NEED to Know!
designing a logo with a polar bear holding the planet Earth for some local treehuggers. Polar bears are hard!
and to think a special trip on 140 race on the dp to deliver a sample and flood their parking lot with diesel smoke is out of the question.....but best be sure they have already paid you before you tease them with truck stuff.
Gooooooooooooood morning world, and hello Lisa glad you're one. Hope the offer comes through on your house as its a hard market. All the local FTE guys can use there trucks and help you move if its sold. Yes, that's right, you all have been recruited!
what the hell, I have 10 days of vacation to burn, i think the last time i drove to Denver it was only 18 hours one way..so figure a nap, some moving here and there, I should be good for two trips..
When I water cooled my PC, it wasnt such a great experience......
I have a buddy of mine who got really drunk one evening last fall and water cooled his cable modem in the middle of the night, thinking he was in the bathroom, if you know what I mean. It didn't turn out so well for his cable modem either.
lol Leo. Yeah I'm not so sure they'd like that either. I do 99% of my design/consultation over the internet. I almost never meet clients in person. I'm like the troll under the bridge, except I sit in the corner of a big office building.
Originally Posted by just another truck
what the hell, I have 10 days of vacation to burn, i think the last time i drove to Denver it was only 18 hours one way..so figure a nap, some moving here and there, I should be good for two trips..
will work for beer!!!
Sweet! That'd be awesome Pat. I have a 12 pack in my fridge that Randy left there that hasn't been touched, free for the drinking. Actually what I really need is a big enclosed trailer that I can take to Iowa one way. The biggest Uhaul has is a 12 ft by 6 ft and I cant find a nationwide company who rents out trailers that are any bigger than that. I dont want to rent a truck, I just wanna throw all my crap in a big trailer and hook up to 'ol red and be outta here.
Pour Coke on it, all over it, let it just dry then wash it off with soapy water, voila!
test a small inconspicuous post, I'm not responsible for you *****ing up your toolbox.
That_Guy... Chris, what the hell's up with your Post Office?
I have no idea, my parents said they didnt get anything either and my moms home most of the day every day. I do know for a fact that our postmaster will not mail anything out of our post office because she knows how bad it is...
Originally Posted by Markadeck
Chris, I think you're right. It was someone that had just returned from a National event of some sorts. Jeremy had been to some truck stuff and I think Scott went to a NHRA event within the same few weeks or days of each other.
Hes the only one I remember posting anything bout metal polish