When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Is there a mod or something that I can do to achieve equal pressure to both sides of the engine for the injectors? Upon doing research I found out that one side gets more pressure than the other and I want to equal them out. Correct me if my thinking is wron but any info is appreciated
It's called HPX or High Pressure Cross over line. The pressure drops on one side right after 2 of the injectors on that side have fired. There are 2 types one is stainless steel and the other is high pressure rubber. I have a steel one for about 2-3 years with no trouble. The rubber lines were blowing in the beginning but it's good now.
sorry bout the slow reply ive been swamped with takin down a 30 by 40 pole barn and taking care of my dad and grandma. thanks alot for the info though i really appreciate it boys.