I need a 2 Barrel Carburator Spacer with the EGR attached for a 1973 302 does anyone carry these ? so far no luck with LMC or NPD

here is a used one of what I want

eBay Motors: Motorcraft 2 Barrel Carburator Spacer (item 320299250562 end time Sep-20-08 19:40:31 PDT)

 

here is the part number that was in the ebay ad.

D70E9A589AB, did you search this part number or not?

 

summit sells this one do you think it will work . My original one is no good and causeing a vacum leak

http://store.summitracing.com/partdetail.asp?autofilter=1&part=EDL%2D8057&N=700+ 4294873482+4294902643+4294873481+115&autoview=sku

 

I searched the part number but the one in the ebay add Is not totally correct it is just close . The connection for the e.g.r is to big and my E.G.R. is smaller in size

 

I have no idea. this one is Edlebrock and the other one is Motorcraft, does that matter?

 

The Summit pic looks like a 4 to 2 V adapter. Check with some of our sponsors with the part number (Greensales for example)

 

ill look around tomorrow i may have 1 or 2 laying around, ill let you have em for shipping only

 

Unfortunately, Ford used a variety of EGR spacer plates through the years; it's difficult to find one. The EGR cavity on the intake changed quite a bit between motors. You won't find one through Summit; a junkyard or eBay (or people here) are your only options.

 

Thank you and let me know what you find .

 

they are not in very good condition, i wouldnt use em again

 

what do most people do ? tear off this stuff and go with a non emmissions set up ?