When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Still shopping for a IC, found a couple "new" 7.3 IC's on ebay for around $150 All the 6.0's are higher, is it really worth the added cost to shell out for a 6.0?
depends on what ya wanna do with it?? how big of injectors? the 6oh cooler is a little better but if ya wanna go big ya may as well start right with a spearco or di. im changin over to water to air in my truck Air to Water Intercooler
ive got an extra 7.3 ic sittin in the shop im not usin
This guys usually has 6.0 coolers for around $100 plus shipping. He had some last week that didn't sell. you might be able message him and see if he has some. he was selling them for $90 buy it now plus shipping. eBay Store - Gale Banks: Category 1, Category 4
TJ, thanks for the link. I emailed him to see if he has any left.
Checked my ebay today, the one 7.3 IC I was thinking of bidding on was around $150 buy it now....auction ended. Was relisted for $245!!! LoL
im plannin on having it on the top of the motor vbanded right to the compressor outlet then build the pipe to vband it to the other side of the cooler and 90 right to the manifolds im looking at the 600hp 3" in/out ic with the pipes on the same side
im gonna run the largest radiator possible which is supposed to be good for over 1200hp with the bosch pump on the cold side at the bottom of the radiator
i wanna do this so when i build the new motor with the sequentials im gonna cool both stages
O boy, sequentials and 1200 hp in a thread reminds me of another thread I read who hit about 103 lbs of boost before he decided to do a motor teardown the VERY quick way..............LOL
O boy, sequentials and 1200 hp in a thread reminds me of another thread I read who hit about 103 lbs of boost before he decided to do a motor teardown the VERY quick way..............LOL