4v intake
Thread Starter
|
Senior User
Joined: Apr 2000
Posts: 112
Likes: 0
4v intake
I had found an old 4v intake just laying around and it seems to bb in pretty good condition but i dont know what it goes to, hear are the numbers on the intake:
S C8AE Firing order: 15426378
9425-f
all help would be greatly apperated
S C8AE Firing order: 15426378
9425-f
all help would be greatly apperated
New User
Joined: Jun 2000
Posts: 10
Likes: 1
4v intake
The only thing that I can tell with tha part no. is that it was cast in 1968 so it may have been installed on a 1968-1969 engine. What do the ports look like are they oval or rectangular is it a wet or dry manifold and does it have pushrod holes and valve cover gasket flange cast into it?
Freshman User
Joined: Jun 2000
Posts: 27
Likes: 0
4v intake
I'm assuming the intake has a big 'S' stamped on it forward of the carb pad.If so it is the casting used on 390 GT engines originally in 1966.
With the C8 casting it's intended use is a 1968 390/325 FE design.These intakes are plentiful and don't offer much in the way of performance,but if your looking for an intake to do a 4V/2V swap it's ok except for the weight......Happy Motoring..Dave.
With the C8 casting it's intended use is a 1968 390/325 FE design.These intakes are plentiful and don't offer much in the way of performance,but if your looking for an intake to do a 4V/2V swap it's ok except for the weight......Happy Motoring..Dave.
Thread
Thread Starter
Forum
Replies
Last Post
Nick-1973-ford
1973 - 1979 F-100 & Larger F-Series Trucks
7
Apr 10, 2019 11:51 PM
bamaf150
FE & FT Big Block V8 (332, 352, 360, 390, 406, 410, 427, 428)
5
Jul 14, 2011 03:45 PM
cheez67
FE & FT Big Block V8 (332, 352, 360, 390, 406, 410, 427, 428)
9
Jan 13, 2008 05:56 PM
