intercooler y-pipe..

Reply Subscribe

Thread Tools

Search this Thread

Dec 31, 2007 | 03:48 PM

gt8684

Thread Starter

Senior User

Joined: Nov 2005

Posts: 206

Likes: 0

From: Folsom, Louisiana

intercooler y-pipe..

i found this on ebay, and i didnt know if it would fit the obs trucks?

http://cgi.ebay.com/ebaymotors/FORD-...QQcmdZViewItem

thanks guys

Dec 31, 2007 | 05:07 PM

c00nhunterjoe

Lead Driver

Joined: May 2007

Posts: 8,608

Likes: 13

From: Belair md

nope wont fit your truck, any of them with air intake heaters are off the late 99-03's the turbo outlet pipe is too big and wont mate to your turbo. now if you swapped the newer turbo over and changed your intake manifolds to the 3 incher's then it would work

Dec 31, 2007 | 05:14 PM

c00nhunterjoe

Lead Driver

Joined: May 2007

Posts: 8,608

Likes: 13

From: Belair md

i just checked, they dont have any listed for our trucks, but i did find a hell of a deal on a 7.3 intercooler.

http://cgi.ebay.com/ebaymotors/2001-...spagenameZWDVW

Dec 31, 2007 | 10:15 PM

gt8684

Thread Starter

Senior User

Joined: Nov 2005

Posts: 206

Likes: 0

From: Folsom, Louisiana

well what if i used the d66 turbo? and i want to get the billet intakes with 3" openings.. would it fit then ?

Dec 31, 2007 | 11:26 PM

Neal 97 250

Post Fiend

Joined: Mar 2007

Posts: 9,010

Likes: 5

From: Johnson City, TN.

The d66 is identical to our stock as far as connections. I toyed with the idea of the 3" fittings as well and was talked out of it though but it is possible.

Dec 31, 2007 | 11:42 PM

gt8684

Thread Starter

Senior User

Joined: Nov 2005

Posts: 206

Likes: 0

From: Folsom, Louisiana

i just want a nice free flowing y pipe, i just dont want any bottle necks... i want to run a d66 turbo with a banks 6.0 intercooler for maximum cool air, and 3" intakes to help prevent from going from nice big piping to smaller piping. creating a bottleneck... i would like to have atleast 3" from turbo to intakes, but i dont know if there is enough space to fit it all past the turbo outlet and intake inlets.

Jan 1, 2008 | 10:01 AM

c00nhunterjoe

Lead Driver

Joined: May 2007

Posts: 8,608

Likes: 13

From: Belair md

first off, get a stock 6.0 cooler, they are a whole lot cheaper and flow just as good. the d66 isnt a 3 inch outlet if i recall correctly? but you can put the 3 inch intakes off a super duty on your truck. the only way to get the closest diameters across the board without going ridiculous in price is swapping the whole superduty turbo and pipe set-up from an 01-03 truck. they have the larger turbo outlet, and the whole x-pipe is 3 inch into 3 inch intakes, no reducers