Does anyone know where I could get a diagram or tell how the power door lock actuator rods connect to the latch on a 98 Explorer - power door locks but no keyless entry. I can see where the interior and exterior handle rods go along with the manual door lock button. The problemn is the rods from the solenoid and the lock cylinder. They both connect very close to each other.
I have searched and also found the excellent write up by cuniack and the gallery but the latch looks different. My solenoid is riveted to the door shell with an rod that goes up to the latch.

 

Use the door on the other side as your guide to reassemble the first door.

 

Did you get your door working again or do you still need help?