Final check on build
Thread Starter
|
Fleet Mechanic
Joined: May 2004
Posts: 1,436
Likes: 0
From: Montana
There is this one which im starting to think is a stock reproduction like the 4bbl performers are:
http://store.summitracing.com/partde...5&autoview=sku
I was hoping if that flowed better than stock I could throw this one on top to get full use of my heads and cam.
http://store.summitracing.com/partde...5&autoview=sku
Then theres always this one for the 351.....
http://store.summitracing.com/partde...5&autoview=sku
http://store.summitracing.com/partde...5&autoview=sku
I was hoping if that flowed better than stock I could throw this one on top to get full use of my heads and cam.
http://store.summitracing.com/partde...5&autoview=sku
Then theres always this one for the 351.....
http://store.summitracing.com/partde...5&autoview=sku
FTE Legend
Joined: Jun 2006
Posts: 31,930
Likes: 1,499
From: Ottawa, Ontario
That 5.8 performer lower will flow lots more air than the stock 5.8 lower, combine that with the 5.0 performer upper, not the performer rpm upper. The Trickflow is another good option.
Thread
Thread Starter
Forum
Replies
Last Post
DJdemon6696
1987 - 1996 F150 & Larger F-Series Trucks
16
Aug 10, 2007 11:09 PM
whiteyfordzx5
1987 - 1996 F150 & Larger F-Series Trucks
9
Nov 29, 2006 04:22 PM
RotGrubestier44
335 Series- 5.8/351M, 6.6/400, 351 Cleveland
2
Oct 26, 2006 08:54 PM
