Switch positions (diablo)
Thread Starter
|
New User
Joined: Dec 2002
Posts: 6
Likes: 0
From: anderson us
Switch positions (diablo)
Installed Diablo Chip with one program, switch position is in middle when on. There still is one position to left and one to right. I assume one is adding another program the other return to stock. Without adding another program does either side position return to stock or turn off. What a difference with Pulley chip and air intake. Thanks Jim
Post Fiend
Joined: Jan 1997
Posts: 23,165
Likes: 18
From: Enjoying the real world.
Switch positions (diablo)
The position opposite the notch in the threads is stock. The position with the notch, when you don't have a program in it, will operate the same as the middle position.
Thread
Thread Starter
Forum
Replies
Last Post
doczenith1
Computer Chips & Tuners
2
Nov 29, 2002 11:27 AM
