When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I've recently lost my chassis diagram of a 51 F-3 truck. You know the ones that show the body and give measurements. I can find 48 F-1/F-2 and 53 ones but not the one I had before. Anyone got this one?
That's close but the one I'm looking for was actually for a 1951 truck. I'm trying to make a finished truck sketch, like what my truck would look like when it's done. I got a picture I want on paper but it was printed in low quality so it would take a lot of editing to get it too look good. I've sent a pm to dick. I'm currently do the rear view of my truck from his 48 F-2 scan. The rear view is identical except for the window which is easily made bigger. Thanks for your help.
hello friend how are you , my name fritz 'm from Peru and have a van f1 and was looking for a diagram of the frame and the image you have post I need it , but you can not see much 'll be able to do me a favor and send it to me in size Original measures to better see , I would greatly appreciate it , thank you very much for your patience and time atte Fritz .
Old thread. Anyway, here's the factory charts for the 1951 F-1 panel.
And I'm sure Nathan has his 1951 F-3 diagram by now, but here it is just in case. Stu
friend thank you very much for the information serves me well , later I'll upload the pictures of what I advance P.S. I put them here image I found another place to see if anyone is missing , the frame 1948 to 1952 is the same