Ford Truck Enthusiasts Forums - View Profile: bobj49f2



bobj49f2 has much to be proud ofbobj49f2 has much to be proud ofbobj49f2 has much to be proud ofbobj49f2 has much to be proud ofbobj49f2 has much to be proud ofbobj49f2 has much to be proud ofbobj49f2 has much to be proud ofbobj49f2 has much to be proud ofbobj49f2 has much to be proud of

bobj49f2 bobj49f2 is offline

Post Fiend

Visitor Messages

Showing Visitor Messages 1 to 10 of 42
  1. tennsmith
    10-25-2017 05:34 PM - permalink
    tennsmith
    I have it going into the mechanism from the inside of the cab to the outside. That is to say, I have the bolt, then spring, then small washer thru the link that is fastened to the vent door, then the threaded spacer with checkered face facing the grooved edge of the vent length, then the spacer small diameter thru the opening handle and then the larger washer and lock nut on the outside of the opening handle. I saw a post on another forum that showed the bolt and spring going in from the outside to the middle of the truck, thru the opening handle first, then threaded into the spacer, then thru the link to the door, then the washer and locknut. This just seems "wrong" to me as I think the spring would be required to tension the checkered spacer face against the grooved link to the door. Do you recall which way that assembly goes?
  2. tennsmith
    10-25-2017 05:34 PM - permalink
    tennsmith
    This is going to be a two part message...as it is long. Bob, I read your post about removing the cowl vent on the 49-52 F series truck and made a fatal mistake prior to reading your text. It has to do with the orientation/order of assembly of the pivot bolt, washer, spring, threaded spacer, 2nd washer and locknut......and I made no pictures. :-)

    I got the vent in/out, replaced the gasket but seem to be having trouble getting the assembly adjusted so the vent will both stay up and latch closed. The pivot bolt seems to be the critical player and I am wondering if I have reassembled mine correctly. 2nd part to follow:
  3. 1950FordF1
    02-23-2016 09:54 PM - permalink
    1950FordF1
    Bob, can you send a link to the tutorial for the right side mirror bracket for our f1s
    Thanks,
    Tim
  4. Chris 56 f6
    06-06-2015 11:14 PM - permalink
    Chris 56 f6
    Sharon modal a days tomorrow
  5. Chris 56 f6
    04-18-2015 08:59 PM - permalink
    Chris 56 f6
    Chat night did you go to Jefferson
  6. Chris 56 f6
    04-11-2015 10:10 PM - permalink
    Chris 56 f6
    Is it me your is the guy gegger a overposter
  7. Chris 56 f6
    04-11-2015 08:36 PM - permalink
    Chris 56 f6
    Come talk to me in the nifty fifties social girl
  8. FunkTractor
    03-18-2015 03:11 PM - permalink
    FunkTractor
    Hi Bob I saw one of your posts about possibly having a Crank Pulley for a 1948 - 1951 Truck wide belt? I have a dual pulley on my tractor and the outer pulley is crack and looking for a replacement. I only use the inner pulley. Thanks for your help. Doug R.
  9. 49f3dls
    10-12-2014 08:41 PM - permalink
    49f3dls
    Hi Bob. I've been swamped of late as we sold the house and have been packing and all that stuff that goes along with it. I was wondering if you still have the tee shirt from the TS14 I ordered? If not no problem is so can I send you a SASE so you can send it to me? Hope all is going well in the job. Dave S
  10. smitty city
    09-25-2014 01:58 PM - permalink
    smitty city
    bob
    we are working on a 48 1/2 ton flatbet...saw your wooden stakes on this site and wanted to know if you made them or are they available somewhere? and what about the hardware?
    thanks for your help, mike smith

About Me

  • About bobj49f2
    Location
    SE Wisc. (the Rust Belt)
    Interests
    Old trucks, fishing
    2 Letter State/Province (use "--" for outside USA/
    WI
    Country of Residence
    US
    Make
    Ford
    Model
    F-1 through F-8
    Year
    1949
    Current Mileage
    100,000 - 124,999
    Miles per year
    1,000 - 4,999
  • Signature
    Old trucks, it's a sickness-one I hope they never find a cure for!
    Bob Jones--Fat Fender Aficionado--FTE member since '96
    49 F-2 pickup/48 F-1 panel truck
    48/51 F-4 flatbed (2 in 1)/49 8N tractor

    www.fatfenderedtrucks.com

Statistics

Total Posts
Albums
Visitor Messages
General Information
  • Last Activity: Yesterday 03:45 PM
  • Join Date: 01-04-2001
  • Referrals: 1

Friends

Showing Friends 1 to 10 of 25

All times are GMT -5. The time now is 10:43 AM.


We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.