Help ID this flywheel # please
Thread Starter
|
Senior User
Joined: Dec 2003
Posts: 202
Likes: 0
From: Tyler Co., West Virginia
Help ID this flywheel # please
I hope this is a 351m-400 flywheel, it is part number D7TE 6380 DG
the last two digits im not sure of, im positive on the D but the other one looks like it was messed up at the factory, it could be a 6, a G, or even a zero or O as in oscar.
I have two flywheels with the exact number above and it is drilled for an eleven inch clutch and looks like it will bolt on to the crank of the 400 I have.
I hope this is a 351m-400 flywheel, I called advanced, auto zone, and napa, all three told me they can only get new flywheels, prices start around 320 and up for a steel one.
Any help on this would be appreciated, Dave
the last two digits im not sure of, im positive on the D but the other one looks like it was messed up at the factory, it could be a 6, a G, or even a zero or O as in oscar.
I have two flywheels with the exact number above and it is drilled for an eleven inch clutch and looks like it will bolt on to the crank of the 400 I have.
I hope this is a 351m-400 flywheel, I called advanced, auto zone, and napa, all three told me they can only get new flywheels, prices start around 320 and up for a steel one.
Any help on this would be appreciated, Dave
Thread
Thread Starter
Forum
Replies
Last Post
jtapal
1973 - 1979 F-100 & Larger F-Series Trucks
4
May 15, 2016 01:17 AM
wxo
Big Block V8 - 385 Series (6.1/370, 7.0/429, 7.5/460)
4
Nov 10, 2007 10:33 PM
Cybertaz126
Small Block V8 (221, 260, 289, 5.0/302, 5.8/351W)
23
Jun 20, 2007 05:06 AM
RGAZ
Small Block V8 (221, 260, 289, 5.0/302, 5.8/351W)
20
Feb 3, 2001 08:36 AM
