Problem is I still don't have it and not worrying about it and spare key will limited the extra stress

 

So essentially you dropped by to let us know this topic is irrelevant to you?

 

not necessarily, anyone can get in, in under 1 hour, with no damage...web search brings up a site with all the codes, you just have to start typing...

Weak security in our daily lives - Everything2.com
It is exactly 3129 keypresses long, which should take you around 20 minutes to go through.

 

This is the location of the Keypad code for 2003 Expedition XLT thank you for sharing. It is best to open the glove box and squeeze the sides until it goes all the way down. The keypad code will be all the way to the back to the right it is hard to see. Follow the red wires all the way to the back and write down the series of numbers. it is easy to get the numbers confused, I wrote it down backwards and confused the sixes with nines so pay attention to what those numbers are and thanks again for sharing this and it is still relevant in 2018...




All the way to the back where you can hardly see the barcode it will have the 5 numbers. follow the red wires all the way to the back on the right best to pull the glove box in the down position and go straight back this is for 2003 XLT Expedition 4.6l

 

Just wanted to thank this whole forum and this thread for helping me with amazing info like this...This place is an absolutely invaluable source of knowledge! Thank you all!