How high for 32?
Thread Starter
|
Senior User
Joined: Feb 2004
Posts: 164
Likes: 0
From: Alberta
I got a 1''1/8 socket with a three quarter drive and a huge breaker bar and twisted the hethens off.took time but it went well.the coils gave around 1''/1/4-1''1/2 liftand really smartened up the ride,not certain if it'll clear the 32s though. my area of concern is at the front of the wheel well at the bottom when turning.my 30s come pretty near the edge of the lip of the fender.
thinking about trimming the fenders up to the first contour about 3/4 of an inch. but then i lose mudflap and wheel well mounting.or maybe a 2 inch body lift.But thats a lot of hassle...Decisions decisions
thinking about trimming the fenders up to the first contour about 3/4 of an inch. but then i lose mudflap and wheel well mounting.or maybe a 2 inch body lift.But thats a lot of hassle...Decisions decisions
Thread
Thread Starter
Forum
Replies
Last Post
dale gribble
1987 - 1996 F150 & Larger F-Series Trucks
17
Sep 20, 2005 09:12 PM
