D2TEAA heads
Thread Starter
|
Senior User
Joined: Feb 2004
Posts: 145
Likes: 0
From: Marine Corps Air Station
D2TEAA heads
Are these heads worth rebuilding or should I just save up to get Edelbrocks. Money is tight but I don't want to rebuild factory heads just to save a buck.
Postmaster
Joined: Nov 2002
Posts: 3,447
Likes: 1
From: Littleton, CO
If you rebuild the heads to factory type specs, it will cost about $400, to rebuild them similar to the EBrocks, $700-$800 and of course they are still iron heads.
How much performance do you want to spend...
--Mike
How much performance do you want to spend...
--Mike
Thread Starter
|
Senior User
Joined: Feb 2004
Posts: 145
Likes: 0
From: Marine Corps Air Station
I want alot of power. I was just wondering if these heads were worth keeping. I have another 390 with crappy stock heads and was hoping one set would be worth holding onto. I guess I will have to put an ad in the classified here.
FE "Freakin Expensive"
Joined: Dec 2003
Posts: 6,461
Likes: 4
From: Smith Mountain Lake, VA
Oh I can understand that..there not for eveyone's pocket..Hell im 50..It took me 4 mos. to save to get a set without taking money away from the house hold..
Education is more important anyway..Ya always have time for building..it just takes time and money!
Education is more important anyway..Ya always have time for building..it just takes time and money!
Thread
Thread Starter
Forum
Replies
Last Post
big_ford_rednek
Small Block V8 (221, 260, 289, 5.0/302, 5.8/351W)
10
Nov 4, 2009 07:15 AM
zoomeroo
FE & FT Big Block V8 (332, 352, 360, 390, 406, 410, 427, 428)
7
Mar 20, 2007 10:59 PM
getandgo
Big Block V8 - 385 Series (6.1/370, 7.0/429, 7.5/460)
1
May 21, 2005 09:16 PM
DannyP
Small Block V8 (221, 260, 289, 5.0/302, 5.8/351W)
4
Oct 28, 2001 08:52 PM
