decal removal
Thread Starter
|
Junior User
Joined: Mar 2004
Posts: 51
Likes: 0
From: brant lake
decal removal
need tips on how to remove the 4x4 decals off my box. im in the process of wet sanding and tried just about everything to get it off. i also want ot get that stick tape stuff off that was left on there after i riped the crome molding off. any suggestions will help! Steve
Elder User
Joined: Mar 2003
Posts: 999
Likes: 1
From: Willamette Valley Oregon
<cr>
For the stucky stuff, I would try some lacquer thinner on a paper towel.
On the decals, you might try a heat gun. They do make a pinstriping remover. It's sort of a pencil eraser material device that you attach to a drill.
For the stucky stuff, I would try some lacquer thinner on a paper towel.
On the decals, you might try a heat gun. They do make a pinstriping remover. It's sort of a pencil eraser material device that you attach to a drill.
Postmaster
Joined: Aug 2003
Posts: 2,977
Likes: 1
From: South Texas
Try RapidTac RapidRemover if you can find it. A vinyl graphics shop should carry it.
http://www.rapidtac.com/
http://www.rapidtac.com/
Thread
Thread Starter
Forum
Replies
Last Post
Lightning LA
1987 - 1996 F150 & Larger F-Series Trucks
20
May 15, 2013 02:10 PM
