Alternator source for Alternators
Its Comin Right for us!
Joined: Feb 2005
Posts: 12,206
Likes: 2,662
From: GA
This was the photo that KBO76 dropped on the forum several years ago, in ho hum nonchalant fashion, citing that he was simply doing routine maintenance.
Not many have the equipment to do this at home. I don't think SSJ even has a twin post lift with a tall enough ceiling in a shop to make this happen.
From posted photos, most DIY guys show their cabs dangling from the buckets of front end loaders.
So I will probably continue teasing KBO76 about this until some more of you guys "level up" and get your shops built and lifts installed.
Not many have the equipment to do this at home. I don't think SSJ even has a twin post lift with a tall enough ceiling in a shop to make this happen.
From posted photos, most DIY guys show their cabs dangling from the buckets of front end loaders.
So I will probably continue teasing KBO76 about this until some more of you guys "level up" and get your shops built and lifts installed.
Thread
Thread Starter
Forum
Replies
Last Post
