pathfinder parts
Thread Starter
|
Cross-Country
Joined: Mar 2003
Posts: 54
Likes: 0
From: Phoenix
pathfinder parts
I'm working on a friends 89 E250 with the 4x4 kit from pathfinder. They went out of business long ago and I'm going nuts. The shifter handle for the transfer case that bolts to the trans was froze up and the bushings were junk. I thought I found the bushings but were too big. I went with the F250 bushing but were too big. It has the c6 trans. Can anyone point me in the right direction. to find these bushings. Any help would be greatly appreciated.
Hotshot
Joined: Jul 2020
Posts: 10,453
Likes: 2,630
From: Near Salt Lake City
They are the old metal bushings inside the lever where the big inch and an eighth bolt goes right?
Those were hard to get even 30 years ago
The bigger plactic ones are out there
Try Ebay for NOS 1978 style bushings
Those were hard to get even 30 years ago
The bigger plactic ones are out there
Try Ebay for NOS 1978 style bushings
Thread Starter
|
Cross-Country
Joined: Mar 2003
Posts: 54
Likes: 0
From: Phoenix
These were 2 plastic bushings. I thought I found some but they were too big. I ended up trimming them down to fit and then honing them out to fit. It's all good. Thanks for the reply.
Thread
Thread Starter
Forum
Replies
Last Post
es2rider
1961 - 1966 F-100 & Larger F-Series Trucks
10
Mar 24, 2024 09:01 PM
ericknight
1967 - 1972 F-100 & Larger F-Series Trucks
16
May 17, 2022 07:47 PM
nutter3
1973 - 1979 F-100 & Larger F-Series Trucks
5
Mar 8, 2022 12:00 PM
