Starting issues
Thread Starter
|
New User
Joined: Mar 2022
Posts: 7
Likes: 0
Starting issues
I have a 88 Ford ranger 4x4, 2.9 V6 fuel injection. I have changed the starter, ignition coil, ignition switch and the lock cylinder. My problem is that when starting it the starter continues to turn after it has started the motor. I the have to play with the key in order for it to stop. Any suggestions on how to fix would be great.
Thread Starter
|
New User
Joined: Mar 2022
Posts: 7
Likes: 0
I have a 88 Ford ranger 4x4, 2.9 V6 fuel injection. I have changed the starter, ignition coil, ignition switch and the lock cylinder. My problem is that when starting it the starter continues to turn after it has started the motor. I the have to play with the key in order for it to stop. Any suggestions on how to fix would be great.
Moderator
Joined: Jan 2004
Posts: 13,851
Likes: 111
From: SW Va
Welcome to FTE.
The symptoms you've posted sound like the starter spring loaded bendix is hanging up & not disengaging, as its responsible for breaking the high current starter motor contacts to turn the starter off, as it retrieves the bendix from the flywheel teeth.
SO, if this is the OEM starter, its probably time for replacement. If cash is short & your a fair wrench turner, you might be able to open it up & clean, lube & replace broken, worn out, or rusty, mucked up parts just in need of a good cleaning & lube job. Or if you have a known quality local starter / alternator rebuilder, they may be an alternative option. Next lowest cost may be a salvage yard starter.
Easiest is likely a quality reman starter. Most expensive will be a new one. Whatever you choose to do, have the starter Bench tested Before leaving the store with it, even if its a new one.
A bunch of beginning thoughts that came to mind, for consideration. Let us know what you find, do & how it goes.
The symptoms you've posted sound like the starter spring loaded bendix is hanging up & not disengaging, as its responsible for breaking the high current starter motor contacts to turn the starter off, as it retrieves the bendix from the flywheel teeth.
SO, if this is the OEM starter, its probably time for replacement. If cash is short & your a fair wrench turner, you might be able to open it up & clean, lube & replace broken, worn out, or rusty, mucked up parts just in need of a good cleaning & lube job. Or if you have a known quality local starter / alternator rebuilder, they may be an alternative option. Next lowest cost may be a salvage yard starter.
Easiest is likely a quality reman starter. Most expensive will be a new one. Whatever you choose to do, have the starter Bench tested Before leaving the store with it, even if its a new one.
A bunch of beginning thoughts that came to mind, for consideration. Let us know what you find, do & how it goes.
Moderator
Joined: Jan 2004
Posts: 13,851
Likes: 111
From: SW Va
Wooooops, my oldy moldy eyes missed this last important & telling clue. "I have to play with the key in order for it to stop."!!! So that suggests the ignition switch should be up there on the suspect list & maybe the start relay or solenoid too if their contacts are welding. With the clues posted, the ignition coil doesn't belong on the suspect list for starter motor disengagement problems.
Thread Starter
|
New User
Joined: Mar 2022
Posts: 7
Likes: 0
Ignition switch is brand new the old one broke apart. Starter relay is where, have never had to find or replace one before. Also if I am extremely careful on how far I turn the key it doesn't do it any other suggestions?
Moderator
Joined: Jan 2004
Posts: 13,851
Likes: 111
From: SW Va
To my way of thinking, your last post is clue #2 that suggests something is wrong internally with the new ignition switch. Being new doesn't automatically mean an item is fault free.
Warranty the part & consider another Quality Mfgr part or consider going OEM. Dont opt for another like mfgr part at the same name store, as there may be a faulty run of parts & Murphy's Law would love to mess with you again. More thoughts for pondering.
Warranty the part & consider another Quality Mfgr part or consider going OEM. Dont opt for another like mfgr part at the same name store, as there may be a faulty run of parts & Murphy's Law would love to mess with you again. More thoughts for pondering.
Trending Topics
Thread Starter
|
New User
Joined: Mar 2022
Posts: 7
Likes: 0
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
10 Things Every Truck Owner NEEDS (2026 Edition)
Michael S. Palmer
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
Moderator
Joined: Jan 2004
Posts: 13,851
Likes: 111
From: SW Va
Right, the lock cylinder isn't the switch but don't overlook the interconnecting hdw that mechanically inter connects the two for alignment, mounting, electrical or mechanical connection problems too.
Thread
Thread Starter
Forum
Replies
Last Post
TroutKing
Small Block V8 (221, 260, 289, 5.0/302, 5.8/351W)
8
Mar 9, 2017 01:21 PM
wintremute
1973 - 1979 F-100 & Larger F-Series Trucks
65
Mar 21, 2006 10:56 AM
