Rear shaft
Thread Starter
|
New User
Joined: Jul 2020
Posts: 1
Likes: 0
Rear shaft
I have a 1981 bronco 4x4 with a 351W and a c6 transmission mounted to a 208 transfer case. trying to figure the length of my rear output shaft for a new transmission. Any help would be appreciated.
Moderator
Joined: Dec 2007
Posts: 7,987
Likes: 104
From: Boise, Idaho
Hey JC, as greystreak stated, there's no way to know without knowing what you're putting in.
But, check out Bronco Graveyard.
https://shop.broncograveyard.com/Bro.../products/162/
They list all of the different combinations of rear driveshafts, years, and transmissions, along with their lengths.
Note that around 1990, they went to a flange style connection instead of a yoke. So, be sure to look up your new combination in at least an 89 and prior.
But, check out Bronco Graveyard.
https://shop.broncograveyard.com/Bro.../products/162/
They list all of the different combinations of rear driveshafts, years, and transmissions, along with their lengths.
Note that around 1990, they went to a flange style connection instead of a yoke. So, be sure to look up your new combination in at least an 89 and prior.
Thread
Thread Starter
Forum
Replies
Last Post
bigredkacy
Clutch, Transmission, Differential, Axle & Transfer Case
3
Dec 20, 2007 07:01 AM
sean
1978 - 1996 Big Bronco
6
Feb 7, 2002 04:10 PM
