Our 7.3L PSD Tech Folder is FTE'r built and maintained! We are very proud of the resources, advice and instant troubleshooting/modification guidance it offers. This guidance is available 24 hours a day, 365 days a year for anyone and everyone that may need it. There is a treasure trove of information in there and ALL of it was provided/created by FTE'rs just like you.

Although, we are lacking a Forscan/Forscan Lite write-up, how-to or video on how to log data and graph/chart that data.

If anyone has a write-up, how-to or video saved in their personal library, please share it here or with me via PM. If anyone is interested in creating a 7.3L PSD specific write-up, how-to or video on the procedure to log and graph/chart data using Forscan/Forscan Lite we would be proud to host it in the 7.3L PSD Tech Folder.

I am willing to help with formatting, wording, sequencing the steps, editing, etc...

If interested in accomplishing something like this to help out your fellow 7.3L FTE'rs let me know here or via PM if you would like to stay out of the public eye. This is an easy way to say thanks or give back to the FTE if you have the desire to do so. If you were on the receiving end of some generosity, mechanical advice or a helping hand and want to give this a shot for the FTE community, it would be greatly appreciated by many for a long time to come.

Thanks and I look forward to working with some of you in the near future in order to fill this need in the 7.3L PSD Tech Folder!

 

Any takers on creating a write-up, how-to or video on how to log data and graph/chart that data using the built in Forscan features?

 

I have to replace the vent fuel lines On the tank in good time I can take photos of the procedure and highlight any tricks. Current timeframe on that is unknown.

The “I have everything I need set up before the job” pretty sure I added plenty more tools during the job lol

The team is Ready for Sous to come help with the Clutch and freewheel write up on this end lol