When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Helpful Tips For Understanding Shop Manuals and Wiring Diagrams
This may come in handy for some of us as we look at wiring diagrams. Wire colors are always indicated as Main Color/Tracer Color. For example, BK/PK is a black wire with pink tracer.
Last edited by FordTruckNoob; 04-24-2020 at 08:50 AM.
Reason: This thread now has more than just wiring color codes
Leonard, I have been thinking about creating a thread on lessons learned or tips and tricks for the Ford Service Manual program, but was not sure how it would be received. I am grateful you have done this because when some of us post a wiring diagram, the readers may not be fully aware of what some of the codes and identifiers mean.
Sous,
Can these be added to the tech folder somewhere? I know I found this informative.
Absolutely and good idea sir! Let's see how this thread develops and who else might be able to contribute and we will add it to the 7.3L PSD Tech Folder once it has materialized more.
EDIT: This thread is now in the Tech Folder under "Misc Information & Modifications".
My comments for additional tips and tricks are indicated by a color filled arrow with a note next to it.
Does Forscan puke out GEM trouble codes? I have it, but I don't recall specifics GEM codes.
Coincidentally, I asked @Stufly63 this very same question earlier today based on this post he made today after fixing his VERY elusive speed control issue.
How did you "pull the GEM DTC's/PID's" in Forscan, what buttons or links did you select?
His response was this via a PM...
Originally Posted by Stufly63
in the module tab, I picked all, then filtered GEM and then selected the appropriate tests. All very much by luck, but I have been doing some reading on the FORScan forum.
I hope he does not mind me sharing a PM conversation with the world, but seeing as it is a question related to steps to take in Forscan in order to read the GEM DTC's, I don't think he will. With all of that said, I would love for someone to post up a step by step procedure (screenshots and arrows are good too) on how to read the GEM DTC's/PID's for future reference on the FTE.
This was the first I had heard of this and FordTruckNoob had to help me to even find the GEM DTC's in the Ford Service Manual because I could not find them. I have since included them in the 7.3L PSD Tech Folder and linked them here as well.