Recomendations for a Stock 351M Rebuild
#1
Recomendations for a Stock 351M Rebuild
I am looking to rebuild my M soon and want to start to figure out what kind of parts I will be using. The truck it is in is being driven to car shows, meets, and the occasional road trip. So definitely not a high power application. I am looking to keep this build cheap, and relatively stock. I have been looking at the Enginetech cams and lifters that are being sold on rock auto, don't know if they are good though. Input on that matter would be appreciated.
Also If you have an experience regarding good and cheap parts for an M engine rebuild, I'd appreciate hearing about it.
Multiple people have told me to drop a 400 crank in it or just scrapt the M because it is garbage, but this truck is supposed to stay close to original, so not an option. Not looking for power, just drivability, and longevity.
Thank You
Also If you have an experience regarding good and cheap parts for an M engine rebuild, I'd appreciate hearing about it.
Multiple people have told me to drop a 400 crank in it or just scrapt the M because it is garbage, but this truck is supposed to stay close to original, so not an option. Not looking for power, just drivability, and longevity.
Thank You
#3
Thread
Thread Starter
Forum
Replies
Last Post
BlueWhiteFord
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
4
09-30-2019 03:20 PM
NMFirstF2504X4
335 Series- 5.8/351M, 6.6/400, 351 Cleveland
31
09-13-2018 11:29 AM
willyg79
335 Series- 5.8/351M, 6.6/400, 351 Cleveland
4
11-19-2006 06:52 PM