Tailgate Molding Replace - Need Push Pin Part #

Reply Subscribe

Thread Tools

Search this Thread

Mar 25, 2019 | 11:30 AM

c04678

Thread Starter

New User

Joined: Sep 2008

Posts: 19

Likes: 0

Tailgate Molding Replace - Need Push Pin Part #

I've replaced the tailgate molding and the push pins are not holding very tight. I have researched and have not been able to find the part # for the push pins.
Closest I have found is a diagram that shows the push pin, but no part number associated to it. Does anyone have a actual parts diagram for the tailgate with step.
Truck is 2014 F250.

Mar 25, 2019 | 03:36 PM

dirthawg

Posting Guru

Joined: Aug 2007

Posts: 1,902

Likes: 26

From: BA, OK

Pop one out and take it to NAPA they have all types and sizes of trim fasteners.

Mar 26, 2019 | 09:29 AM

The Bone

Cargo Master

Joined: Feb 2015

Posts: 2,338

Likes: 255

From: Livermore Ca.

They are generic. You can get them at the dealer. Just take one to them. They got them in the parts department. They are a one time use item.

Dec 2, 2021 | 10:19 AM

MagicMtnDan

Laughing Gas

Joined: Feb 2017

Posts: 996

Likes: 193

From: AZ

Reviving this old thread as one of my Rubber Tailgate Bumpers fell off. Looks like the plastic pin is broken so I need to find one of those.

PN HC3B-9940225-AE

https://www.ebay.com/itm/274151797719