Steering box question
Thread Starter
|
Tuned
Joined: Mar 2009
Posts: 356
Likes: 10
From: South East PA.
Thats not what i"m saying, I torqued all the ball joints and other front end parts as per the torque spec sheet you posted awile back. The ball joint I used the air wrench on was the track bar ball joint, after using a torque wrench on it after replacing it, it had some play in it so I took the air wrench to it to make sure it sinched up, seems to have gotten most of the play out. I'm going to have my son or my wife turn the steering wheel back and forth again to see if the movement in that connection was taken car of....
Dan
Dan
Thread
Thread Starter
Forum
Replies
Last Post
