Wait to start - Remote led
Thread Starter
|
New User
Joined: Jun 2018
Posts: 3
Likes: 0
Wait to start - Remote led
I have a 02 F450 that I recently purchased. I have to move my head around to see the wait to start indicator. Cotton picking steering wheel blocks it most of the time. I want to add a remote led to my A pillar cluster. Any ideas on how to tie it in?
i ain't rite
Joined: Mar 2005
Posts: 65,605
Likes: 5,629
From: Marlboro Mental Hospital.
negative to ground, positive to glow plug side of the glow plug relay.
i drilled a 1/4 inch hole and glued the led in the hole
just be warned, the glow plugs will be powered up to two minutes.
the light in the dash is an idiot light, and will come on whether the glow plugs get powered or not.
i drilled a 1/4 inch hole and glued the led in the hole
just be warned, the glow plugs will be powered up to two minutes.
the light in the dash is an idiot light, and will come on whether the glow plugs get powered or not.
Thread
Thread Starter
Forum
Replies
Last Post
