Need PCV adapter for Y-Block 292
#1
Need PCV adapter for Y-Block 292
I'm converting an older 292 Y-Block that has a draft tube to a PCV system. One of the parts I need attaches to the valley cover. It looks like the red tea pot in the photo. It's found on the later 292 truck engines.
Does anyone have one they could sell to me? I'd rather use one of these than than just use a rubber grommet in the valley cover.
Does anyone have one they could sell to me? I'd rather use one of these than than just use a rubber grommet in the valley cover.
#2
C1AE-6A665-G (replaced C1AE-6A665-E) .. Crankcase Ventilation Adapter / Obsolete
No Ford dealer or obsolete parts vendor has any.
-----
C1AE-6870-A .. Crankcase Ventilation Adapter Gasket / Obsolete ~ 26 available NOS
Lower pic:
#5
One thing I've done a lot is set a search in eBay to mail me if/when it finds a matching part number. I've been able to find things on there that makes people just shake their heads in disbelief. Both for the trucks and my Trans Am - 1 of 885 cars produced - I'm sort of in disbelief about some of it myself.
About 15 years ago I was listening to the local radio station - they were talking about the "Museum of Flight" here in Seattle - they were restoring a now very rare B-17 Flying Fortress, I believe it was...it was missing a large compass that sits in the cockpit. Someone got the idea to check on eBay and there was one for sale.
Never know what you might find out there.
Chad
.
About 15 years ago I was listening to the local radio station - they were talking about the "Museum of Flight" here in Seattle - they were restoring a now very rare B-17 Flying Fortress, I believe it was...it was missing a large compass that sits in the cockpit. Someone got the idea to check on eBay and there was one for sale.
Never know what you might find out there.
Chad
.
#7
...sorry for making you wait, I just haven't had time to get into the parts box, but I do have the part you need! The top is slightly pulled in, but you can push it back out with little effort. You can have it for the $6 shipping fee it will cost me for priority mail. You know that you need the valley cover with the baffle and female threaded hole inside, don't you?Email me your mailing address...ehershkowitz@hotmail.com.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
kjvforme
1961 - 1966 F-100 & Larger F-Series Trucks
6
02-27-2017 09:09 AM
Okobojo
1957 - 1960 F100 & Larger F-Series Trucks
7
02-23-2017 07:54 PM
socal4t12
1961 - 1966 F-100 & Larger F-Series Trucks
5
08-03-2009 10:08 PM