When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Watching " Iron Resurrection " and it reminded of something I'm also having issues with, my heater/ac control selector. It won't switch off of defrost . It blows hot , when the temp's there , but will not switch from 1 spot to the next, hi/lo/vent etc. . Anyone have any suggestions as to where to start ?
Ya think so ? I'm gonna be pulling the dash off before long and taking a closer look soon.
Yes, I think so.
There is no need (usually) to pull the dash to check for this. Of course, if you'd bother to explicitly identify your truck, it would be easier. We are not psychic.
There is no need (usually) to pull the dash to check for this. Of course, if you'd bother to explicitly identify your truck, it would be easier. We are not psychic.
Didn't figure on you being physic . '01 Ford Super Duty,V-10 Triton, 4x4. Turn the heater on the controls won't switch from top to any other position , just stays on defrost.
Went looking for the PVH solenoid . No luck finding that.So I did the next best option for me. I did find the vacuum line going into the cab area. I did find somethng that looked like the PVH , but won't swear to it . I by-passed it . Now I got control of the heater selector again.