Cladding advice
Thread Starter
|
Junior User
Joined: Mar 2017
Posts: 51
Likes: 0
From: Lafayette, CA
Cladding advice
The exterior tan cladding on my chestnut maroon Ex needs to be touched up due to the POs poor parking skills. Two questions:
1) is it worth removing, painting and reinstalling? or just mask and paint? From what I've seen, removal seems intensive and will require new fasteners and tape.
2) I have not found a single non-stock color combo pic online. Any leads on what new color might look cool? bonus points if matched to a new or painted bumper.
1) is it worth removing, painting and reinstalling? or just mask and paint? From what I've seen, removal seems intensive and will require new fasteners and tape.
2) I have not found a single non-stock color combo pic online. Any leads on what new color might look cool? bonus points if matched to a new or painted bumper.
Tuned
Joined: Dec 2015
Posts: 342
Likes: 6
From: Big Sky MT
I took mine off. Didn't like the color combo with a blue exterior & gray interior. It's not hard to do. Cleaning the glue was the worst to get off. Only a few fasteners to deal with. The only holes to deal with are under the rear quarter panels behind the wheel opening. Ford still sell the XLT filler spats.
Thread
Thread Starter
Forum
Replies
Last Post
str8sixman
1987 - 1996 F150 & Larger F-Series Trucks
6
Aug 21, 2012 10:24 AM
